====== Information ======

  * Linksys EA6700 ((https://www.linksys.com/gb/p/P-EA6700))
  * Kong DD-WRT Builds ((''dd-wrt.v24-K3_AC_ARM_STD.bin'' from http://www.desipro.de/ddwrt/K3-AC-Arm/))

====== Settings ======

===== Setup =====

==== Basic Setup ====

  * Router Name: Wraeclast

  * Shortcut Forwarding Engine: Enabled

  * Static DNS 1: 185.121.177.177
  * Static DNS 2: 169.239.202.202
  * Static DNS 3: 185.121.177.177

  * Time Zone: America/New York
  * Server IP/Name: 0.north-america.pool.ntp.org

==== IPv6 ====

  * IPv6: Enabled

  * IPv6 Type: DHCPv6 with Prefix Delegation

  * Static DNS 1: 2a05:dfc7:5::53
  * Static DNS 2: 2a05:dfc7:5::5353

==== DDNS ====

  * https://www.namecheap.com/support/knowledgebase/article.aspx/9356/11/how-to-configure-a-ddwrt-router
  * :!: Make sure to change ''(NameCheap DDNS Password)'' to the actual DDNS password in both ''Password'' and ''URL'' fields

  * DDNS Service: Custom

  * DYNDNS Server:
  * Username:
  * Password:
  * Hostname:
  * URL:

  dynamicdns.park-your-domain.com

  realmofespionage.xyz

  (NameCheap DDNS Password)

  @

  /update?domain=realmofespionage.xyz&password=(NameCheap DDNS Password)&host=

===== Wireless =====

==== Basic Settings ====

=== wl0 [2.4 GHz] ===

  * Wireless Network Mode: N-Only

  * Wireless Network Name (SSID): The Crossroads (2.4GHz)

  * Wireless Channel: 11 - 2.462 GHz
  * Channel Width: Wide HT40 (40 MHz)
  * Extension Channel: lower

=== Virtual Interface wl0.1 [2.4 GHz] ===

  * Wireless Network Name (SSID): The Lower Prison (2.4GHz ISO)

  * Network Configuration: Unbridged
  * Net Isolation: Enabled ((prevents clients on this AP from accessing LAN resources; allows WAN/internet usage still))

  * IP Address: 192.168.2.1
  * Subnet Mask: 255.255.255.0

=== wl1 [5GHz] ===

  * Wireless Network Mode: AC-Only ((very few old devices need AC/N-Mixed such as Samsung Smart TV))

  * Wireless Network Name (SSID): Highgate (5GHz)

  * Wireless Channel: 48 - 5.240 GHz ((Fire TV Sticks need some low 5GHz channel))
  * Channel Width: VHT80 (80 MHz)
  * Extension Channel: upper upper

  * Explicit Beamforming: Enabled
  * Implicit Beamforming: Enabled

==== Wireless Security ====

  * Applies to ''wl0'', ''wl0.1'', and ''wl1''

  * Security Mode: WPA2 Personal
  * WPA Algorithms: AES
  * WPA Shared Key: (usual)

==== WL-Advanced ====

  * Applies to both ''WL0'' and ''WL1''

  * TX Power: Manual -> 999

===== Services =====

==== Services ====

  * ttraff Daemon: Disabled

  * Additional DNSMasq Options: ((only required if the virtual wireless AP exists))

<code>
interface=wl0.1
dhcp-option=wl0.1,3,192.168.2.1
dhcp-range=wl0.1,192.168.2.100,192.168.2.125,255.255.255.0,12h</code>

===== Security =====

==== Firewall ====

  * Enable the following:

  * Limit SSH Access
  * Limit Telnet Access
  * Limit PPTP Server Access
  * Limit FTP Server Access

===== Access Restrictions =====

==== Policy 1 ====

  * Policy Name: Seagate NAS
  * List of Clients -> MAC 01: (Seagate NAS Ethernet MAC)
  * PCs: Deny

==== Policy 2 ====

  * Policy Name: Samsung TV
  * List of Clients -> MAC 01: (Samsung TV Wifi MAC)
  * PCs: Deny

==== Policy 3 ====

  * Policy Name: Thistlesage RuneAudio
  * List of Clients -> MAC 01: (Raspberry Pi Ethernet MAC)
  * PCs: Deny

==== Policy 4 ====

  * Policy Name: Kole HP Printer
  * List of Clients -> MAC 01: (HP Printer Ethernet MAC)
  * List of Clients -> MAC 02: (HP Printer Wifi MAC)
  * PCs: Deny

===== NAT / QoS =====

==== Port Forwarding ====

  * HTTP, 80, TCP, 153
  * HTTPS, 443, TCP, 153

===== Administration =====

==== Keep Alive ====

  * Schedule Reboot: Enabled
  * At a set Time: 05:00 Everyday

====== Telnet ======

===== Connect =====

  * Username is ''root'' with admin password

  telnet '192.168.1.1'

===== Update =====

==== TFTP ====

  tftp 192.168.1.1

  binary

  rexmt 1

  timeout 60

  put firmware.bin

==== Stable ====

  * http://www.desipro.de/ddwrt/K3-AC-Arm/

  wget -O '/tmp/firmware.bin' 'http://www.desipro.de/ddwrt/K3-AC-Arm/dd-wrt.v24-K3_AC_ARM_STD.bin' && sync && mtd write '/tmp/firmware.bin' 'linux'

==== Test ====

  * http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/

  wget -O '/tmp/firmware.bin' 'http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin' && sync && mtd write '/tmp/firmware.bin' 'linux'

==== NVRAM Wipe ====

  * May be necessary after an update
  * :!: This will wipe out all router settings and everything will need set back up again

  erase nvram

==== Reboot ====

****

  sync && reboot

===== Overclock =====

==== Get Current Clocks ====

  * Likely ''800,533'' by-default

  nvram get 'clkfreq'

==== Set Clocks ====

****

  nvram set 'clkfreq'='1200,600' && nvram commit

====== TODO ======

Setup > advanced routing

This Blocks Google DNS

Google Primary DNS and Google Secondary DNS (1 and 2)

Metric: 2

Destination: Primary = 8.8.8.8 Secondary = 8.8.4.4

Subnet Mask: 255.255.255.255

Gateway: 192.168.1.1

Interface: LAN and WLAN

http://svn.dd-wrt.com/ticket/1483