====== Information ======

  * Linksys EA6700 ((https://www.linksys.com/gb/p/P-EA6700))
  * FreshTomato-ARM ((https://www.linksysinfo.org/index.php?threads/fork-freshtomato-arm.74117/))

====== Settings ======

===== Basic =====

==== Network ====

=== WAN Settings ===

  * DNS server is the IPv4 addresses for OpenNIC's Anycast Tier 2 servers

  * DNS Server: Manual
  * DNS 1: 185.121.177.177
  * DNS 2: 169.239.202.202

=== LAN ===

  * IP Range: 192.168.100 - 149

=== Wireless (2.4 GHz / eth1) ===

  * Wireless Network Mode: N Only
  * SSID: The Crossroads (2.4GHz)
  * Channel: 6 - 2.437 GHz
  * Channel Width: 40 MHz
  * Control Sideband: Upper

  * Security: WPA2 Personal
  * Encryption: AES
  * Shared Key: (usual)

=== Wireless (5 GHz / eth2) ===

  * Wireless Network Mode: Auto
  * SSID: Highgate (5GHz)
  * Channel: 40 - 5.200 GHz
  * Channel Width: 80 MHz
  * Control Sideband: Upper

  * Security: WPA2 Personal
  * Encryption: AES
  * Shared Key: (usual)

==== IPv6 ====

=== IPv6 Configuration ===

  * DNS server is the IPv6 addresses for OpenNIC's Anycast Tier 2 servers

  * IPv6 Service Type: DHCPv6 with Prefix Delegation
  * Static DNS:

  2a05:dfc7:5::53

  2a05:dfc7:5::5353

==== Identification ====

=== Router Identification ===

  * Router Name: Wraeclast

==== Time ====

=== Time ===

  * Time Zone: UTC-05:00 Eastern Time
  * NTP Time Server: North America

==== DDNS ====

=== Dynamic DNS 1 ===

  * :!: Change Password to DDNS password

  * Service: namecheap
  * Hostname: @
  * Domain: realmofespionage.xyz
  * Password: x

===== Advanced =====

==== Adblock ====

=== Adblock Settings ===

  * Enable: [x]

=== Blacklist URL ===

  * Delete everything

  * On: [x]
  * Blacklist URL:
  * Description:

  https://raw.githubusercontent.com/StevenBlack/hosts/master/alternates/fakenews-gambling/hosts

  Unified hosts + fakenews + gambling

==== MAC Address ====

=== MAC Address ===

  * Random all 3 ((due to a CFE data wipe, this router has no legitimate MAC address))

==== Port Forwarding ====

=== Basic ===

== Port Forwarding ==

  * :!: If more than a web server is being hosted, this will need additional entries

  * On: [x]
  * Protocol: TCP
  * Ext Ports: 80
  * Int Address: 192.168.1.153
  * Description: HTTP

  * On: [x]
  * Protocol: TCP
  * Ext Ports: 443
  * Int Address: 192.168.1.153
  * Description: HTTPS

===== Administration =====

===== Admin Access =====

===== Username / Password =====

  * Username: x
  * Allow web login as "root": [ ]
  * Password: x
  * (re-enter to confirm): x

===== TomatoAnon =====

  * :!: TODO: Maybe submit a patch to fix the wording on this

  * Do you know what TomatoAnon doing ?: Yes, i do and want to make a choice
  * Do you want enable TomatoAnon ?: Yes, i`m sure i do

===== Scheduler =====

==== Reboot ====

  * Enabled: [x]
  * Time: 5:00 AM
  * Days: Everyday

====== Update ======

===== Notes =====

  * https://www.linksysinfo.org/index.php?threads/fork-freshtomato-arm.74117/
  * https://bitbucket.org/kille72/freshtomato-arm/src

===== Web UI =====

  * http://192.168.1.1/admin-upgrade.asp

  * http://freshtomato.org/
  * https://exotic.se/freshtomato-arm/

  freshtomato-EA6700-ARM-x-AIO-64K.zip

===== Alternatives =====

==== TFTP ====

  * :!: ''firmware.bin'' should be the name of the firmware file that exists in the directory you're in when you started the ''tftp'' command

  tftp 192.168.1.1

  binary

  rexmt 1

  timeout 60

  put firmware.bin

==== mtd ====

  * :!: This was **not** tested with Tomato
  * :!: This assumes the CFE was modified to only have a single ''linux'' partition, and not the dual-partition thing that stock firmware/CFE used ((can re-run the command and target ''linux2'' if at all unsure if there's a second partition))
  * :!: Change the ''wget'' URL as-needed
  * :!: ''login'' username is ''root''

  telnet '192.168.1.1'

  wget -O '/tmp/firmware.bin' 'URL' && sync && mtd write '/tmp/firmware.bin' 'linux'

==== NVRAM Wipe ====

  * May be necessary after an update
  * :!: This will wipe out all router settings and everything will need set back up again

  erase nvram

==== Reboot ====

****

  sync && reboot

====== Tweaks ======

===== Overclock =====

==== Get Current Clocks ====

  * Likely ''800,533'' by-default

  nvram get 'clkfreq'

==== Set Clocks ====

****

  nvram set 'clkfreq'='1200,600' && nvram commit