User Tools

Site Tools


devices:ea6700_dd-wrt

Information

  • Linksys EA6700 1)
  • Kong DD-WRT Builds 2)

Settings

Setup

Basic Setup

  • Router Name: Wraeclast
  • Shortcut Forwarding Engine: Enabled
  • Static DNS 1: 185.121.177.177
  • Static DNS 2: 169.239.202.202
  • Static DNS 3: 185.121.177.177
  • Time Zone: America/New York
  • Server IP/Name: 0.north-america.pool.ntp.org

IPv6

  • IPv6: Enabled
  • IPv6 Type: DHCPv6 with Prefix Delegation
  • Static DNS 1: 2a05:dfc7:5::53
  • Static DNS 2: 2a05:dfc7:5::5353

DDNS

  • DDNS Service: Custom
  • DYNDNS Server:
  • Username:
  • Password:
  • Hostname:
  • URL:
dynamicdns.park-your-domain.com
realmofespionage.xyz
(NameCheap DDNS Password)
@
/update?domain=realmofespionage.xyz&password=(NameCheap DDNS Password)&host=

Wireless

Basic Settings

wl0 [2.4 GHz]

  • Wireless Network Mode: N-Only
  • Wireless Network Name (SSID): The Crossroads (2.4GHz)
  • Wireless Channel: 11 - 2.462 GHz
  • Channel Width: Wide HT40 (40 MHz)
  • Extension Channel: lower

Virtual Interface wl0.1 [2.4 GHz]

  • Wireless Network Name (SSID): The Lower Prison (2.4GHz ISO)
  • Network Configuration: Unbridged
  • Net Isolation: Enabled 3)
  • IP Address: 192.168.2.1
  • Subnet Mask: 255.255.255.0

wl1 [5GHz]

  • Wireless Network Mode: AC-Only 4)
  • Wireless Network Name (SSID): Highgate (5GHz)
  • Wireless Channel: 48 - 5.240 GHz 5)
  • Channel Width: VHT80 (80 MHz)
  • Extension Channel: upper upper
  • Explicit Beamforming: Enabled
  • Implicit Beamforming: Enabled

Wireless Security

  • Applies to wl0, wl0.1, and wl1
  • Security Mode: WPA2 Personal
  • WPA Algorithms: AES
  • WPA Shared Key: (usual)

WL-Advanced

  • Applies to both WL0 and WL1
  • TX Power: Manual → 999

Services

Services

  • ttraff Daemon: Disabled
  • Additional DNSMasq Options: 6)
interface=wl0.1
dhcp-option=wl0.1,3,192.168.2.1
dhcp-range=wl0.1,192.168.2.100,192.168.2.125,255.255.255.0,12h

Security

Firewall

  • Enable the following:
  • Limit SSH Access
  • Limit Telnet Access
  • Limit PPTP Server Access
  • Limit FTP Server Access

Access Restrictions

Policy 1

  • Policy Name: Seagate NAS
  • List of Clients → MAC 01: (Seagate NAS Ethernet MAC)
  • PCs: Deny

Policy 2

  • Policy Name: Samsung TV
  • List of Clients → MAC 01: (Samsung TV Wifi MAC)
  • PCs: Deny

Policy 3

  • Policy Name: Thistlesage RuneAudio
  • List of Clients → MAC 01: (Raspberry Pi Ethernet MAC)
  • PCs: Deny

Policy 4

  • Policy Name: Kole HP Printer
  • List of Clients → MAC 01: (HP Printer Ethernet MAC)
  • List of Clients → MAC 02: (HP Printer Wifi MAC)
  • PCs: Deny

NAT / QoS

Port Forwarding

  • HTTP, 80, TCP, 153
  • HTTPS, 443, TCP, 153

Administration

Keep Alive

  • Schedule Reboot: Enabled
  • At a set Time: 05:00 Everyday

Telnet

Connect

  • Username is root with admin password
telnet '192.168.1.1'

Update

TFTP

tftp 192.168.1.1
binary
rexmt 1
timeout 60
put firmware.bin

Stable

wget -O '/tmp/firmware.bin' 'http://www.desipro.de/ddwrt/K3-AC-Arm/dd-wrt.v24-K3_AC_ARM_STD.bin' && sync && mtd write '/tmp/firmware.bin' 'linux'

Test

wget -O '/tmp/firmware.bin' 'http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin' && sync && mtd write '/tmp/firmware.bin' 'linux'

NVRAM Wipe

  • May be necessary after an update
  • :!: This will wipe out all router settings and everything will need set back up again
erase nvram

Reboot

sync && reboot

Overclock

Get Current Clocks

  • Likely 800,533 by-default
nvram get 'clkfreq'

Set Clocks

nvram set 'clkfreq'='1200,600' && nvram commit

TODO

Setup > advanced routing

This Blocks Google DNS

Google Primary DNS and Google Secondary DNS (1 and 2)

Metric: 2

Destination: Primary = 8.8.8.8 Secondary = 8.8.4.4

Subnet Mask: 255.255.255.255

Gateway: 192.168.1.1

Interface: LAN and WLAN

http://svn.dd-wrt.com/ticket/1483

2)
dd-wrt.v24-K3_AC_ARM_STD.bin from http://www.desipro.de/ddwrt/K3-AC-Arm/
3)
prevents clients on this AP from accessing LAN resources; allows WAN/internet usage still
4)
very few old devices need AC/N-Mixed such as Samsung Smart TV
5)
Fire TV Sticks need some low 5GHz channel
6)
only required if the virtual wireless AP exists
devices/ea6700_dd-wrt.txt · Last modified: 2018/12/04 18:20 by Sean Rhone