Differences

This shows you the differences between two versions of the page.

--- devices:linksys_ea6350_v3 [2021/09/09 02:33] – Sean Rhone
+++ devices:linksys_ea6350_v3 [2022/12/09 12:18] – Sean Rhone
@@ Line 14: / Line 14: @@
 ==== Links ====
+  * :!: 2022: OpenWRT snapshot builds were disabled at some point, see https://github.com/openwrt/openwrt/pull/11405
   * [[https://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_ea6350v3-squashfs-factory.bin|factory.bin]]
@@ Line 26: / Line 28: @@
   rm -f '/tmp/sysupgrade.img' && sync && sysupgrade --force -n -v 'https://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_ea6350v3-squashfs-sysupgrade.bin'
-  rm -R ~/'.ssh' && ping '192.168.1.1'
+  rm -Rf ~/'.ssh' && ping '192.168.1.1'
 ====== Packages ======
   * [[https://openwrt.org/docs/guide-user/luci/luci.essentials|LuCI]] ((snapshot images don't include LuCI, so it needs installed on **every** clean snapshot install))
-  * ''nano'' is used to enable ''irqbalance''
   ssh 'root'@'192.168.1.1'
-  passwd
+  sync && passwd
   opkg update && opkg install luci irqbalance nano && sync
-====== irqbalance ======
+====== Wireless AP Mode ======
-  nano '/etc/config/irqbalance'
+  * [[https://openwrt.org/docs/guide-user/network/wifi/dumbap|Wireless Access Point / Dumb Access Point / Dumb AP]]
+===== Network =====
+  * [[https://openwrt.org/docs/guide-user/network/openwrt_as_routerdevice|OpenWrt as router device]]
+  * Sets router IP to ''192.168.1.2''
+  * Sets router Gateway and DNS to ''192.168.1.1''
+  * Disables DHCPv6
 <code>
-        option enabled '1'</code>
+uci set network.lan.ipaddr=192.168.1.2 && uci set network.lan.gateway=192.168.1.1 && uci set network.lan.dns=192.168.1.1 && uci set dhcp.lan.dhcpv6=disabled && uci set dhcp.lan.ra=disabled && uci commit && service network restart && sync</code>
+===== Services =====
+  * Disables ''dnsmasq'', ''firewall'', and ''odhcpd'' services
+<code>
+/etc/init.d/dnsmasq disable && /etc/init.d/dnsmasq stop && /etc/init.d/firewall disable && /etc/init.d/firewall stop && /etc/init.d/odhcpd disable && /etc/init.d/odhcpd stop && /etc/init.d/network reload && sync</code>
+====== irqbalance ======
+  * https://openwrt.org/docs/guide-user/services/irqbalance
+  nano '/etc/config/irqbalance'
 ====== LuCI ======
-  * http://192.168.1.1
+  * http://192.168.1.2
 ===== Startup =====
-  * http://192.168.1.1/cgi-bin/luci/admin/system/startup
   * https://forum.openwrt.org/t/ipq40xx-ea6350-v3-as-wap-wifi-to-lan-latency/51623/8
   * :!: This is seemingly required in order to keep latency at a consistent 0.2ms on Ethernet
+  * http://192.168.1.2/cgi-bin/luci/admin/system/startup
 <code>
-# Put your custom commands here that should be executed once
+echo 'performance' | tee '/sys/devices/system/cpu/cpufreq/policy0/scaling_governor' > '/dev/null'</code>
-# the system init finished. By default this file does nothing.
-echo 'performance' | tee '/sys/devices/system/cpu/cpufreq/policy0/scaling_governor' > '/dev/null'
-exit 0</code>
 ==== Verify ====
@@ Line 72: / Line 90: @@
 <code>cat '/sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq'</code>
-===== Quad9 DNS =====
+===== Scheduled Reboot =====
-  * [[https://quad9.net/service/service-addresses-and-features#ecssec|Secured w/ECS]]
+  * https://www.albertogonzalez.net/how-to-reboot-nightly-your-openwrt-router/
+  * https://openwrt.org/docs/guide-user/base-system/cron#periodic_reboot
+  * http://192.168.1.2/cgi-bin/luci/admin/system/crontab
+<code>
+# Restart 3:32 AM
+3 * * * sleep 70 && touch /etc/banner && reboot</code>
+===== 1.1.1.1 DNS =====
+  * https://1.1.1.1/dns/
   * See [[notes:dns_servers|DNS servers]] for other DNS servers
-<code>2620:fe::11</code>
+<code>2606:4700:4700::1111</code>
-<code>2620:fe::fe:11</code>
-<code>9.9.9.11</code>
+<code>2606:4700:4700::1001</code>
-<code>149.112.112.11</code>
+<code>1.1.1.1</code>
+<code>1.0.0.1</code>
 ===== Wireless =====
@@ Line 88: / Line 120: @@
   * Country Code: US
   * Channel: 6
-  * Width: 40 MHz
+  * Width: 20 MHz
   * Encryption: WPA2-PSK CCMP AES
@@ Line 101: / Line 133: @@
 <code>The Beacon (5GHz)</code>
+====== Recovery ======
+===== mtd =====
+  * https://openwrt.org/toh/linksys/ea8300#revert_to_stock
+  * OpenWRT -> Linksys
+==== Download Stock Firmware ====
+  * https://www.linksys.com/support-article?articleNum=148481
+  * ''3.1.10.191322'' from 2018 is the latest as of 2022/12/09
+  ssh 'root'@'192.168.1.1'
+  wget 'https://downloads.linksys.com/downloads/firmware/FW_EA6350v3_3.1.10.191322_prod.img'
+==== Check Current Firmware Partition ====
+  * 11 = ''kernel''
+  * 13 = ''alt_kernel''
+  * :!: Flash operations should be done on the kernel **not** mentioned in the following command ((so if ''13'' for ''alt_kernel'' is reported, ''mtd'' commands should be applied to ''kernel''))
+  cat '/sys/devices/virtual/ubi/ubi0/mtd_num'
+==== Erase Non-current Firmware Partition ====
+  mtd erase 'kernel'
+  mtd erase 'alt_kernel'
+==== Flash Stock Firmware ====
+  mtd write 'FW_EA6350v3_3.1.10.191322_prod.img' 'kernel'
+  mtd write 'FW_EA6350v3_3.1.10.191322_prod.img' 'alt_kernel'
+==== Boot Stock Firmware ====
+  * 1 = ''kernel''
+  * 2 = ''alt_kernel''
+  fw_setenv 'boot_part' '1'
+  fw_setenv 'boot_part' '2'
+  sync && reboot