User Tools

Site Tools


devices:linksys_ea6350_v3

This is an old revision of the document!


Information

Notes

  • 2021/07/02: :!: When using Oculus Air Link and a speed test at 60Mbps download, CPU 0 is around 75% load and the other 3 are 1-5%. Packet Steering is disabled by-default and doesn't seem to do anything when enabled. irqbalance spreads the load quite nicely and drops CPU 0 in the same situation to around 20%. Presumably, if ISP speeds increase beyond 60Mbps, irqbalance will be required.
  • 2021/08: For 5GHz, the wireless channels chosen needs to do 30 dBm on both 2.4GHz and 5GHz. For 5GHz, 149 works fine.

Snapshot

sysupgrade

  • This downloads the latest sysupgrade.bin and installs it
ssh 'root'@'192.168.1.1'
rm -f '/tmp/sysupgrade.img' && sync && sysupgrade --force -n -v 'https://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_ea6350v3-squashfs-sysupgrade.bin'
rm -Rf ~/'.ssh' && ping '192.168.1.1'

Packages

ssh 'root'@'192.168.1.1'
passwd
opkg update && opkg install luci && sync

Wireless AP

Network

  • Sets router IP to 192.168.1.2
  • Sets router Gateway and DNS to 192.168.1.1
  • Disables DHCPv6
uci set network.lan.ipaddr=192.168.1.2 && uci set network.lan.gateway=192.168.1.1 && uci set network.lan.dns=192.168.1.1 && uci set dhcp.lan.dhcpv6=disabled && uci set dhcp.lan.ra=disabled && uci commit && service network restart && sync

Services

  • Disables dnsmasq, firewall, and odhcpd services
/etc/init.d/dnsmasq disable && /etc/init.d/dnsmasq stop && /etc/init.d/firewall disable && /etc/init.d/firewall stop && /etc/init.d/odhcpd disable && /etc/init.d/odhcpd stop && /etc/init.d/network reload && sync

LuCI

Startup

# Put your custom commands here that should be executed once
# the system init finished. By default this file does nothing.

echo 'performance' | tee '/sys/devices/system/cpu/cpufreq/policy0/scaling_governor' > '/dev/null'

exit 0

Verify

echo 'performance' | tee '/sys/devices/system/cpu/cpufreq/policy0/scaling_governor' > '/dev/null'
cat '/sys/devices/system/cpu/cpufreq/policy0/scaling_governor'
cat '/sys/devices/system/cpu/cpufreq/policy0/cpuinfo_cur_freq'

Quad9 DNS

2620:fe::11
2620:fe::fe:11
9.9.9.11
149.112.112.11

Wireless

2.4GHz

  • Country Code: US
  • Channel: 6
  • Width: 40 MHz
  • Encryption: WPA2-PSK CCMP AES
The Cathedral Rooftop (2.4GHz)

5GHz

  • Country Code: US
  • :!: Channel: 149
  • Width: 80 MHz
  • Encryption: WPA2-PSK CCMP AES
The Beacon (5GHz)
1)
snapshot images don't include LuCI, so it needs installed on every clean snapshot install
/var/www/wiki/data/attic/devices/linksys_ea6350_v3.1631175060.txt.gz · Last modified: 2021/09/09 04:11 by Sean Rhone