RoE | Wiki

User Tools

Site Tools

Trace:
devices:netgear_r6260_openwrt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
devices:netgear_r6260_openwrt [2021/09/09 02:18] – Sean Rhonedevices:netgear_r6260_openwrt [2022/06/11 19:20] – Sean Rhone
Line 2: Line 2:
  
   * [[https://www.netgear.com/home/products/networking/wifi-routers/R6260.aspx|NETGEAR R6260]]   * [[https://www.netgear.com/home/products/networking/wifi-routers/R6260.aspx|NETGEAR R6260]]
-  * [[https://openwrt.org|OpenWrt]] ((https://openwrt.org/toh/netgear/r6260))+  * [[https://openwrt.org|OpenWrt]] 
 +  * [[https://openwrt.org/toh/netgear/r6260|OpenWrt Device Page]]
   * [[https://openwrt.org/releases/snapshot|Snapshot]]   * [[https://openwrt.org/releases/snapshot|Snapshot]]
  
Line 11: Line 12:
   * 2021/06/29: Enabling ''802.11w Management Frame Protection'' on 2.4GHz caused a NC200 to not be able to connect   * 2021/06/29: Enabling ''802.11w Management Frame Protection'' on 2.4GHz caused a NC200 to not be able to connect
   * Stock firmware reports ''d(149)+p(153)+d(157)+d(161)'' for 5GHz channels with ''153'' selected and ''11(P)+7(S)'' for 2.4GHz with ''11'' selected   * Stock firmware reports ''d(149)+p(153)+d(157)+d(161)'' for 5GHz channels with ''153'' selected and ''11(P)+7(S)'' for 2.4GHz with ''11'' selected
-  * :!: Both Software and Hardware Flow Offload is broken with IPv6 as reported [[https://bugs.openwrt.org/index.php?do=details&task_id=3373|here]] and [[https://forum.openwrt.org/t/21-02-0-rc3-losing-ipv6-packets-when-flow-offloading-1/100575|here]] 
  
 ====== Snapshot ====== ====== Snapshot ======
Line 26: Line 26:
   * This downloads the latest ''sysupgrade.bin'' and installs it   * This downloads the latest ''sysupgrade.bin'' and installs it
  
-  ssh 'root'@'192.168.1.1'+  ssh root@192.168.1.1
  
   rm -f '/tmp/sysupgrade.img' && sync && sysupgrade --force -n -v 'https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-netgear_r6260-squashfs-sysupgrade.bin'   rm -f '/tmp/sysupgrade.img' && sync && sysupgrade --force -n -v 'https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-netgear_r6260-squashfs-sysupgrade.bin'
  
   rm -Rf ~/'.ssh' && ping '192.168.1.1'   rm -Rf ~/'.ssh' && ping '192.168.1.1'
 +
 +  del %UserProfile%"\.ssh\known_hosts" && ping -t "192.168.1.1"
  
 ===== Packages ===== ===== Packages =====
Line 36: Line 38:
   * [[https://openwrt.org/docs/guide-user/luci/luci.essentials|LuCI]] ((snapshot images don't include LuCI, so it needs installed on **every** clean snapshot install))   * [[https://openwrt.org/docs/guide-user/luci/luci.essentials|LuCI]] ((snapshot images don't include LuCI, so it needs installed on **every** clean snapshot install))
  
-  ssh 'root'@'192.168.1.1'+  ssh root@192.168.1.1
  
   sync && passwd   sync && passwd
Line 46: Line 48:
   * http://192.168.1.1   * http://192.168.1.1
  
-===== 1.1.1.1 DNS =====+===== DHCP =====
  
 +  * Network -> Interfaces -> LAN -> DHCP Server -> Limit
 +
 +  48
 +
 +===== DNS =====
 +
 +==== Notes ====
 +
 +  * This advertises an upstream DNS server directly to clients instead of the router
   * https://1.1.1.1/dns/   * https://1.1.1.1/dns/
   * See [[notes:dns_servers|DNS servers]] for other DNS servers   * See [[notes:dns_servers|DNS servers]] for other DNS servers
  
-<code>2606:4700:4700::1111</code> +==== IPv4 ==== 
-<code>2606:4700:4700::1001</code>+ 
 +  * Network -> Interfaces -> LAN -> DHCP Server -> Advanced Settings -> DHCP-Options 
 +  * :!: The ''6,'' is intentional (([[https://old.reddit.com/r/openwrt/comments/hr6xig/how_to_set_openwrt_to_use_1111_dns_for_example/fylsewz/?context=3|Reddit]], [[https://datatracker.ietf.org/doc/html/rfc2132#section-3.8|RFC 2132]])) 
 + 
 +<code>6,1.1.1.1,1.0.0.1</code> 
 + 
 +=== IPs === 
 <code>1.1.1.1</code> <code>1.1.1.1</code>
 +
 <code>1.0.0.1</code> <code>1.0.0.1</code>
 +
 +==== IPv6 ====
 +
 +  * Network -> Interfaces -> LAN -> DHCP Server -> Advanced Settings -> IPv6 Settings -> Announced IPv6 DNS servers
 +
 +<code>2606:4700:4700::1111</code>
 +<code>2606:4700:4700::1001</code>
  
 ===== Wireless ===== ===== Wireless =====
  
 ==== 2.4GHz ==== ==== 2.4GHz ====
 +
 +  * Advanced Settings -> [x] Disable Inactivity Polling
 +  * Advanced Settings -> [ ] Disassociate On Low Acknowledgement
  
   * Country Code: US   * Country Code: US
   * Channel: 11   * Channel: 11
-  * Width: 40 MHz+  * Width: 20 MHz
   * Encryption: WPA2-PSK CCMP AES   * Encryption: WPA2-PSK CCMP AES
-  * :!: 802.11w Management Frame Protection: Disabled 
  
 <code>The Crossroads (2.4GHz)</code> <code>The Crossroads (2.4GHz)</code>
  
 ==== 5GHz ==== ==== 5GHz ====
 +
 +  * :!: Advanced Settings -> [x] Disable Inactivity Polling
 +  * :!: Advanced Settings -> [ ] Disassociate On Low Acknowledgement
 +  * :!: These seem to fix 5GHz instability with a Chromecast
  
   * Country Code: US   * Country Code: US
-  * :!: Channel: 153+  * :!: Channel: 149
   * Width: 80 MHz   * Width: 80 MHz
   * Encryption: WPA2-PSK CCMP AES   * Encryption: WPA2-PSK CCMP AES
-  * :!: 802.11w Management Frame Protection: Disabled 
  
 <code>Highgate (5GHz)</code> <code>Highgate (5GHz)</code>
Line 80: Line 111:
 ===== Firewall ===== ===== Firewall =====
  
-  * Forward ports ''80'' and ''443''+==== Webserver ==== 
 + 
 +  * Oak 
 + 
 +<code>HTTP</code> 
 +<code>80</code> 
 +<code>HTTPS</code> 
 +<code>443</code> 
 + 
 +==== Steam Remote Play ==== 
 + 
 +  * [[https://help.steampowered.com/en/faqs/view/0689-74B8-92AC-10F2|Steam Support]] 
 + 
 +=== UDP === 
 + 
 +<code>Steam Remote Play (UDP)</code> 
 +<code>27031</code> 
 +<code>27036</code> 
 + 
 +=== TCP === 
 + 
 +<code>Steam Remote Play (TCP)</code> 
 +<code>27036</code> 
 +<code>27037</code>
  
 ====== Recovery ====== ====== Recovery ======
Line 99: Line 153:
   sudo ~/'Downloads/nmrpflash-0.9.16-linux/nmrpflash' -i 'enp6s0' -f ~/'Downloads/R6260-V1.1.0.84_1.0.1/R6260-V1.1.0.84_1.0.1.img'   sudo ~/'Downloads/nmrpflash-0.9.16-linux/nmrpflash' -i 'enp6s0' -f ~/'Downloads/R6260-V1.1.0.84_1.0.1/R6260-V1.1.0.84_1.0.1.img'
  
-====== OpenWRT Compile ====== 
- 
-https://forum.openwrt.org/t/new-xiaomi-router-ac2100/48101/403 
- 
-<code>dmesg | grep dma</code> 
- 
-https://github.com/openwrt/openwrt/blob/master/target/linux/ramips/dts/mt7621_netgear_r6260.dts 
- 
-https://github.com/openwrt/openwrt/blob/master/target/linux/ramips/dts/mt7621.dtsi 
- 
-sudo dnf install gcc gcc-c++ git perl-FindBin make patch perl-Thread-Queue ncurses-devel 
- 
-  cd ~ && mkdir -p ~/'Projects' && rm -Rf ~/'Projects/openwrt/src' && git clone --branch 'master' --depth '1' --recurse-submodules 'https://git.openwrt.org/openwrt/openwrt.git' ~/'Projects/openwrt/src' && sync 
- 
-  cd ~/'Projects/openwrt/src' && ~/'Projects/openwrt/src/scripts/feeds' update -a 
- 
-  cd ~/'Projects/openwrt/src' && ~/'Projects/openwrt/src/scripts/feeds' install -a 
- 
-  cd ~/'Projects/openwrt/src' && make menuconfig 
- 
-  nano '/home/espionage724/Projects/openwrt/src/target/linux/ramips/dts/mt7621.dtsi' 
- 
-gdma = enaled 
-dma = enabled 
- 
- 
-  nano '/home/espionage724/Projects/openwrt/src/target/linux/ramips/dts/mt7621_netgear_r6260.dts'  
- 
-<code> 
-&gdma { 
-    status = "okay"; 
-}; 
- 
-&hsdma { 
-    status = "okay"; 
-};</code> 
- 
-menconfig -> kernel modules -> Other modules -> kmod-dma-ralink & kmod-hsdma-mtk 
- 
-  nano '/home/espionage724/Projects/openwrt/src/target/linux/ramips/mt7621/config-5.4'  
- 
-<code>CONFIG_MTK_HSDMA=y</code> 
- 
-===== Lean ===== 
- 
-  * https://github.com/coolsnowwolf/lede 
-  * https://openwrt.org/docs/guide-developer/build-system/install-buildsystem 
- 
-  sudo zypper install --no-recommends asciidoc bash bc binutils bzip2 fastjar flex gawk gcc gcc-c++ gettext-tools git git-core intltool libopenssl-devel libxslt-tools make mercurial ncurses-devel patch perl-ExtUtils-MakeMaker python-devel rsync sdcc unzip util-linux wget zlib-devel 
- 
-  cd ~ && mkdir -p ~/'Projects' && rm -Rf ~/'Projects/lean-openwrt/src' && git clone --branch 'master' --depth '1' --recurse-submodules 'https://github.com/coolsnowwolf/lede.git' ~/'Projects/lean-openwrt/src' && sync 
- 
-  cd ~/'Projects/lean-openwrt/src' && ~/'Projects/lean-openwrt/src/scripts/feeds' update -a 
- 
-  cd ~/'Projects/lean-openwrt/src' && ~/'Projects/lean-openwrt/src/scripts/feeds' install -a 
- 
-  cd ~/'Projects/lean-openwrt/src' && make menuconfig 
- 
-  * Target System: MediaTek Ralink MIPS 
-  * Subtarget: MT7621 based boards 
-  * Target Profile: NETGEAR R6260 
-  * :!: TODO: mt driver instead of mt76 
- 
-  cd ~/'Projects/lean-openwrt/src' && make -j8 download V=s && sync 
- 
-  cd ~/'Projects/lean-openwrt/src' && make -j$(($(nproc) + 1)) V=s && sync 
- 
-  gio open ~/'Projects/lean-openwrt/src/bin/targets/ramips/mt7621' 
- 
-==== Copy/Install to Router ==== 
- 
-  scp ~/'Projects/lean-openwrt/src/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-netgear_r6260-squashfs-sysupgrade.bin' 'root'@'192.168.1.1':'/tmp' 
- 
-  ssh 'root'@'192.168.1.1' 
- 
-  sysupgrade --force -n -v '/tmp/openwrt-ramips-mt7621-netgear_r6260-squashfs-sysupgrade.bin' 
- 
-  ping '192.168.1.1' 
- 
-==== Post-install ==== 
- 
-**** 
- 
-  opkg update && opkg install 'luci-i18n-base-en' 
/var/www/wiki/data/pages/devices/netgear_r6260_openwrt.txt · Last modified: 2022/12/12 02:25 by Sean Rhone