Differences

This shows you the differences between two versions of the page.

--- devices:network:linksys_ea6350_v3_openwrt [2024/08/13 19:38] – created Sean Rhone
+++ devices:network:linksys_ea6350_v3_openwrt [2025/09/11 06:43] (current) – external edit 127.0.0.1
@@ Line 10: / Line 10: @@
   * 2021/07/02: :!: When using Oculus Air Link and a speed test at 60Mbps download, CPU 0 is around 75% load and the other 3 are 1-5%. Packet Steering is disabled by-default and doesn't seem to do anything when enabled. irqbalance spreads the load quite nicely and drops CPU 0 in the same situation to around 20%. Presumably, if ISP speeds increase beyond 60Mbps, irqbalance will be required.
   * 2021/08: For 5GHz, the wireless channels chosen needs to do 30 dBm on both 2.4GHz and 5GHz. For 5GHz, 149 works fine.
+  * :!: 2024/05/13: Wrong polarity on power barrel will fry the router/require hardware repair ([[https://discussion.fedoraproject.org/t/i-rebuilt-my-nas-and-also-powered-my-whole-network-from-molex/117002|post]])
 ====== Snapshot ======
@@ Line 42: / Line 43: @@
 ====== Wireless AP Mode ======
-  * [[https://openwrt.org/docs/guide-user/network/wifi/dumbap|Wireless Access Point / Dumb Access Point / Dumb AP]]
+  * https://openwrt.org/docs/guide-user/network/wifi/relay_configuration
 ===== Network =====
-  * [[https://openwrt.org/docs/guide-user/network/openwrt_as_routerdevice|OpenWrt as router device]]
+  * Sets router IP to ''192.168.2.1''
-  * Sets router IP to ''192.168.1.2''
   * Sets router Gateway and DNS to ''192.168.1.1''
   * Disables DHCPv6
-<code>
+<code>uci set network.lan.ipaddr=192.168.2.1 & uci set network.lan.gateway=192.168.1.1 & uci set network.lan.dns=192.168.1.1 & uci set dhcp.lan.dhcpv6=disabled & uci set dhcp.lan.ra=disabled & uci commit & service network restart & sync</code>
-uci set network.lan.ipaddr=192.168.1.2 && uci set network.lan.gateway=192.168.1.1 && uci set network.lan.dns=192.168.1.1 && uci set dhcp.lan.dhcpv6=disabled && uci set dhcp.lan.ra=disabled && uci commit && service network restart && sync</code>
 ===== Services =====
@@ Line 59: / Line 57: @@
   * Disables ''dnsmasq'', ''firewall'', and ''odhcpd'' services
-<code>
+<code>/etc/init.d/dnsmasq disable & /etc/init.d/dnsmasq stop & /etc/init.d/firewall disable & /etc/init.d/firewall stop & /etc/init.d/odhcpd disable & /etc/init.d/odhcpd stop & /etc/init.d/network reload & sync</code>
-/etc/init.d/dnsmasq disable && /etc/init.d/dnsmasq stop && /etc/init.d/firewall disable && /etc/init.d/firewall stop && /etc/init.d/odhcpd disable && /etc/init.d/odhcpd stop && /etc/init.d/network reload && sync</code>
 ====== irqbalance ======
@@ Line 70: / Line 67: @@
 ====== LuCI ======
-  * http://192.168.1.2
+  * http://192.168.2.1
 ===== Startup =====
@@ Line 77: / Line 74: @@
   * :!: This is seemingly required in order to keep latency at a consistent 0.2ms on Ethernet
-  * http://192.168.1.2/cgi-bin/luci/admin/system/startup
+  * http://192.168.2.1/cgi-bin/luci/admin/system/startup
 <code>
@@ Line 104: / Line 101: @@
   * https://1.1.1.1/dns/
-  * See [[notes:dns_servers|DNS servers]] for other DNS servers
+  * See [[servers;upstream_dns_servers|DNS servers]] for other DNS servers
 <code>2606:4700:4700::1111</code>
@@ Line 136: / Line 133: @@
 ===== Firewall =====
-  * See [[notes:port_forwards]]
+  * 80/tcp HTTP
+  * 443/tcp HTTPS
 ====== Recovery ======