Differences

This shows you the differences between two versions of the page.

--- devices:oculus_quest_2 [2022/06/09 07:26] – Sean Rhone
+++ devices:oculus_quest_2 [2025/03/16 00:20] (current) – Sean Rhone
@@ Line 1: / Line 1: @@
-====== adb ======
+====== Update ======
+  * https://www.meta.com/help/quest/software_update/
+====== ADB Commands ======
 ===== Android Settings =====
@@ Line 11: / Line 15: @@
 <code>
 adb shell am start -a android.intent.action.VIEW -d com.oculus.tv -e uri com.android.settings/.DevelopmentSettings com.oculus.vrshell/.MainActivity</code>
+===== 120Hz =====
+****
+<code>adb shell "setprop debug.oculus.refreshRate 120"</code>
+===== Performance =====
+  * [[https://developer.oculus.com/documentation/native/android/mobile-power-overview/|Power Management]]
+  * This disables dynamic clocks and forces max clocks on CPU and GPU
+  * :!: This will increase heat and battery/power usage
+  * There's an undocumented level 5: https://old.reddit.com/r/OculusQuest/comments/11e1u2z/quest_2_undocumented_5th_cpugpu_level/
+<code>adb shell "setprop debug.oculus.cpuLevel 5"</code>
+<code>adb shell "setprop debug.oculus.gpuLevel 5"</code>
+<code>adb shell "setprop debug.oculus.adaclocks.force 0"</code>
+<code>adb shell "setprop debug.oculus.phaseSync 1"</code>
+==== Performance AIO ====
+  * Sets CPU and GPU performance level to ''5'', enables [[https://developer.oculus.com/documentation/native/android/mobile-phase-sync/|Phase Sync]] globally, and minor Developer Options tweaks
+<code>adb shell "setprop debug.oculus.cpuLevel 5 && setprop debug.oculus.gpuLevel 5 && setprop debug.oculus.adaclocks.force 0 && setprop debug.oculus.phaseSync 1 && settings put global always_finish_activities 0 && settings put global wifi_scan_throttle_enabled 1 && settings put global window_animation_scale 0.25 && settings put global transition_animation_scale 0.25 && settings put global animator_duration_scale 0.25 && sync"</code>
+<code>adb shell "setprop debug.oculus.refreshRate 120 && sync"</code>
+==== Verify ====
+<code>
+adb shell "getprop debug.oculus.cpuLevel"</code>
+<code>
+adb shell "getprop debug.oculus.gpuLevel"</code>
+<code>
+adb shell "getprop debug.oculus.adaclocks.force"</code>
+<code>
+adb shell "getprop debug.oculus.phaseSync"</code>
+<code>
+adb shell "settings get global always_finish_activities"</code>
+<code>
+adb shell "settings get global wifi_scan_throttle_enabled"</code>
+<code>
+adb shell "settings get global window_animation_scale"</code>
+<code>
+adb shell "settings get global transition_animation_scale"</code>
+<code>
+adb shell "settings get global animator_duration_scale"</code>
+====== Notes ======
+  * :!: Developer mode needs manually re-enabled from Oculus app on mobile after Factory Reset ((any issues with pairing will prevent enabling Dev mode; [[https://www.reddit.com/r/OculusQuest/comments/1bkixqx/adb_not_finding_quest_3/kw0q2tj/|possible workaround]]))
+  * Hold PWR + Vol- to access bootloader menu to perform Factory Reset on-device
+  * ''%localappdata%\Oculus'' contains Logs
+  * :?: Since it's Qualcomm, EDL mode could be interesting to dump and flash partitions
+===== IPD Expander =====
+  * The lenses spread a few mm more past 68mm just enough to make the VR experience significantly better for me around 71mm!
+  * Take a bottle cap and jam it in-between the facial interface and proximity sensor so that it keeps the lenses spread as-far over
+  * :!: Disable the option to automatically wake the headset when you put it on since the proximity sensor is always-covered
 ====== Oculus Link ======
 ===== Graphics Preferences =====
+==== RTX 3060 ====
+  * DCH 516.63
+  * Oculus 42.0.0.136.285
+  * Wired Link with H.264
+  * Windows 10 Enterprise LTSC (19044.1806)
+=== Default ===
+  * 1.0x
+  * 72Hz: 3616 x 1840
+  * 80Hz: 3456 x 1744
+  * 90Hz: 3264 x 1648
+  * 120Hz: 2816 x 1424
+=== Lowest ===
+  * 2432 x 1216
+  * 72Hz: 0.7x
+  * 80Hz: 0.7x
+  * 90Hz: 0.7x
+  * 120Hz: 0.9x
+=== Highest ===
+  * 5408 x 2736
+  * 72Hz: 1.5x
+  * 80Hz: 1.6x
+  * 90Hz: 1.7x
+  * 120Hz: 1.9x
 ==== RX 6600 XT ====
@@ Line 68: / Line 177: @@
 <code>Converted encode resolution</code>
+==== RTX 3060 ====
+  * DCH 516.63
+  * Oculus 42.0.0.136.285
+  * Wired Link with H.264
+  * Windows 10 Enterprise LTSC (19044.1806)
+  * Last updated: 2022/07/11
+  * :!: The same max ''3664'' resolution is usable 72Hz-120Hz as-reported by Oculus
+  * 72Hz = ''3680, 1920'' (3664 selected)
+  * 80Hz = ''3680, 1920'' (3664 selected)
+  * 90Hz = ''3680, 1920'' (3664 selected)
+  * 120Hz = ''3680, 1920'' (3664 selected)
+<code>3680</code>
+=== NvcEncode ===
+  * Last updated: 2022/07/11
+  * :!: TODO
+  * Latency at H.264 is 4ms at 1080p@144, 6ms at 1440p@144, and 10ms at 4K@30 ((HEVC tests didn't run on 22.5.2))
+  * It looks ideal to either use 120Hz, or limit encode resolution for lower refresh rates to ~2560 in order to avoid the 4ms spike
 ==== RX 6600 XT ====
@@ Line 277: / Line 411: @@
 <code>
 sdcard\UE4Game\GladiusQuest\GladiusQuest\Saved\SaveGames\GladiusInstance.sav</code>
-====== ADB Commands ======
-===== 120Hz =====
-  * :!: This may increase heat and battery/power usage
-<code>adb shell "setprop debug.oculus.refreshRate 120"</code>
-===== Performance =====
-  * [[https://developer.oculus.com/documentation/native/android/mobile-power-overview/|Power Management]]
-  * This disables dynamic clocks and forces max clocks on CPU and GPU
-  * :!: This will increase heat and battery/power usage
-<code>adb shell "setprop debug.oculus.cpuLevel 4"</code>
-<code>adb shell "setprop debug.oculus.gpuLevel 4"</code>
-<code>adb shell "setprop debug.oculus.adaclocks.force 0"</code>
-====== Tips ======
-  * Developer mode needs manually re-enabled from Oculus app on mobile after Factory Reset
-  * Hold PWR + Vol- to access bootloader menu to perform Factory Reset on-device
-  * ''%localappdata%\Oculus'' contains Logs