RoE | Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ADB Commands ======

===== Android Settings =====

  * [[https://forum.xda-developers.com/t/the-settings-facebook-doesnt-want-you-to-see.4231545/#post-84773847|xda-developers]]

  * This allows access to some Android-specific settings
  * This can be used to clear cache data for apps
  * :!: This can be used to change the timezone if it's incorrect

<code>
adb shell am start -a android.intent.action.VIEW -d com.oculus.tv -e uri com.android.settings/.DevelopmentSettings com.oculus.vrshell/.MainActivity</code>

===== 120Hz =====

****

<code>adb shell "setprop debug.oculus.refreshRate 120"</code>

===== Performance =====

  * [[https://developer.oculus.com/documentation/native/android/mobile-power-overview/|Power Management]]
  * This disables dynamic clocks and forces max clocks on CPU and GPU
  * :!: This will increase heat and battery/power usage
  * There's an undocumented level 5: https://old.reddit.com/r/OculusQuest/comments/11e1u2z/quest_2_undocumented_5th_cpugpu_level/

<code>adb shell "setprop debug.oculus.cpuLevel 5"</code>

<code>adb shell "setprop debug.oculus.gpuLevel 5"</code>

<code>adb shell "setprop debug.oculus.adaclocks.force 0"</code>

<code>adb shell "setprop debug.oculus.phaseSync 1"</code>

==== Performance AIO ====

  * Sets CPU and GPU performance level to ''5'', 120Hz globally, enables [[https://developer.oculus.com/documentation/native/android/mobile-phase-sync/|Phase Sync]] globally, and minor Developer Options tweaks ((''always_finish_activities 1'' could //potentially// cause issues with background apps))

<code>adb shell 'setprop debug.oculus.cpuLevel 5 && setprop debug.oculus.gpuLevel 5 && setprop debug.oculus.adaclocks.force 0 && setprop debug.oculus.phaseSync 1 && settings put global always_finish_activities 1 && settings put global wifi_scan_throttle_enabled 1 && settings put global window_animation_scale 0.25 && settings put global transition_animation_scale 0.25 && settings put global animator_duration_scale 0.25 && setprop debug.oculus.refreshRate 120 && sync'</code>

==== Verify ====

<code>
adb shell 'getprop debug.oculus.cpuLevel'</code>

<code>
adb shell 'getprop debug.oculus.gpuLevel'</code>

<code>
adb shell 'getprop debug.oculus.adaclocks.force'</code>

<code>
adb shell 'getprop debug.oculus.phaseSync'</code>

<code>
adb shell 'settings get global always_finish_activities'</code>

<code>
adb shell 'settings get global wifi_scan_throttle_enabled'</code>

<code>
adb shell 'settings get global window_animation_scale'</code>

<code>
adb shell 'settings get global transition_animation_scale'</code>

<code>
adb shell 'settings get global animator_duration_scale'</code>

====== Notes ======

  * Developer mode needs manually re-enabled from Oculus app on mobile after Factory Reset
  * Hold PWR + Vol- to access bootloader menu to perform Factory Reset on-device
  * ''%localappdata%\Oculus'' contains Logs
  * Since it's Qualcomm, EDL mode could be interesting to dump and flash partitions

===== IPD Expander =====

  * The lenses spread a few mm more past 68mm just enough to make the VR experience significantly better for me around 71mm!
  * Take a bottle cap and jam it in-between the facial interface and proximity sensor so that it keeps the lenses spread as-far over
  * :!: Disable the option to automatically wake the headset when you put it on since the proximity sensor is always-covered

====== Oculus Link ======

===== Graphics Preferences =====

==== RTX 3060 ====

  * DCH 516.63
  * Oculus 42.0.0.136.285
  * Wired Link with H.264
  * Windows 10 Enterprise LTSC (19044.1806)

=== Default ===

  * 1.0x

  * 72Hz: 3616 x 1840
  * 80Hz: 3456 x 1744
  * 90Hz: 3264 x 1648
  * 120Hz: 2816 x 1424

=== Lowest ===

  * 2432 x 1216

  * 72Hz: 0.7x
  * 80Hz: 0.7x
  * 90Hz: 0.7x
  * 120Hz: 0.9x

=== Highest ===

  * 5408 x 2736

  * 72Hz: 1.5x
  * 80Hz: 1.6x
  * 90Hz: 1.7x
  * 120Hz: 1.9x

==== RX 6600 XT ====

  * Adrenalin 22.5.2
  * Oculus 41.0.0.88.353
  * Wired Link with H.264

=== Default ===

  * 1.0x

  * 72Hz: 3616 x 1840
  * 80Hz: 3456 x 1744
  * 90Hz: 3264 x 1648
  * 120Hz: 2816 x 1424

=== Lowest ===

  * 2432 x 1216

  * 72Hz: 0.7x
  * 80Hz: 0.7x
  * 90Hz: 0.7x
  * 120Hz: 0.9x

=== Highest ===

  * 5408 x 2736

  * 72Hz: 1.5x
  * 80Hz: 1.6x
  * 90Hz: 1.7x
  * 120Hz: 1.9x

===== Encode Resolutions =====

==== Notes ====

  * Width x Height
  * If entering into Oculus Debug Tool, only the first part (width) gets inputted into ''Encode Resolution Width'' under ''Oculus Link''
  * :!: This needed manually set if using Air Link with a RX 580
  * :!: These numbers need retrieved from wired Link periodically with Link changes

=== Numbers ===

  - Connect Quest with wired Link cable with desired Refresh Rate set
  - Go to the Oculus folder below
  - Find the last-modified ''Service'' text file
  - Search for the text line ''Converted encode resolution''

<code>%localappdata%\Oculus</code>

<code>Converted encode resolution</code>

==== RTX 3060 ====

  * DCH 516.63
  * Oculus 42.0.0.136.285
  * Wired Link with H.264
  * Windows 10 Enterprise LTSC (19044.1806)

  * Last updated: 2022/07/11
  * :!: The same max ''3664'' resolution is usable 72Hz-120Hz as-reported by Oculus

  * 72Hz = ''3680, 1920'' (3664 selected)
  * 80Hz = ''3680, 1920'' (3664 selected)
  * 90Hz = ''3680, 1920'' (3664 selected)
  * 120Hz = ''3680, 1920'' (3664 selected)

<code>3680</code>

=== NvcEncode ===

  * Last updated: 2022/07/11
  * :!: TODO

  * Latency at H.264 is 4ms at 1080p@144, 6ms at 1440p@144, and 10ms at 4K@30 ((HEVC tests didn't run on 22.5.2))
  * It looks ideal to either use 120Hz, or limit encode resolution for lower refresh rates to ~2560 in order to avoid the 4ms spike

==== RX 6600 XT ====

  * Adrenalin 22.5.2
  * Oculus 41.0.0.88.353
  * Wired Link with H.264

  * Last updated: 2022/06/07

  * 72Hz = ''3680, 1920'' (3664 selected)
  * 80Hz = ''3520, 1920'' (3504 selected)
  * 90Hz = ''3200, 1760'' (3200 selected)
  * 120Hz = ''2752, 1440'' (2736 selected)

<code>3680</code>
<code>3520</code>
<code>3200</code>
<code>2752</code>

<code>
07/06 22:21:11.099 {DEBUG}   [xrstreaming] No hevc support found
07/06 22:21:11.099 {INFO}    [xrstreaming] RemoteHeadset/HEVC not set, Using AVC
07/06 22:21:11.099 {DEBUG}   [xrstreaming] Creating AMD HP3D d3d11 device
07/06 22:21:11.099 {DEBUG}   [xrstreaming] Reported AMD amdlvr64.dll version 1.0.16.0
07/06 22:21:11.099 {DEBUG}   [xrstreaming] AMDALVRFactory::Create: ALVRInit(1.0.15.0, &factory) succeeded.
07/06 22:21:11.141 {DEBUG}   [xrstreaming] AMDALVRDisplayFactory::Create: ALVRInit(1.0.15.0, &factory) succeeded.</code>

=== AmaEncode ===

  * Last updated: 2022/06/07

  * Latency at H.264 is 4ms at 1080p@144, 6ms at 1440p@144, and 10ms at 4K@30 ((HEVC tests didn't run on 22.5.2))
  * It looks ideal to either use 120Hz, or limit encode resolution for lower refresh rates to ~2560 in order to avoid the 4ms spike

==== RX 580 ====

  * Last updated: 2021/10/26
  * Oculus client ''34.0.0.53.185''
  * :!: H.264/AVC

  * 72Hz = ''1984, 1120''
  * 80Hz = ''1824, 960''
  * 90Hz = ''1664, 960''
  * 120Hz = ''1376, 800''

<code>1984</code>
<code>1824</code>
<code>1664</code>
<code>1376</code>

====== APKs ======

  * [[https://www.apkmirror.com/apk/jagex-games-studio/old-school-runescape/|Old School RuneScape]]
  * [[https://github.com/GPUOpen-LibrariesAndSDKs/Radeon-ReLive-VR/releases|Radeon ReLive VR]]
  * [[https://github.com/alvr-org/ALVR-nightly/releases|ALVR Nightlies]] ((useful for Linux testing))
  * [[https://app.circleci.com/pipelines/github/diasurgical/devilutionX|DevilutionX]] ((seems playable with paired Xbox One controller))

====== Game Data ======

  * File sizes are rounded-up

===== RTCWQuest =====

  * https://www.rtcwquest.com/
  * https://sidequestvr.com/app/1446/return-to-castle-wolfenstein-vr
  * https://github.com/DrBeef/RTCWQuest

  * Full RTCW install
  * Venom VR 6.5.2 with improved AI ''sp_vpak9.pak''

  * 2021/08/31: 1.24 GB

<code>
sdcard\RTCWQuest\Main\pak0.pk3
sdcard\RTCWQuest\Main\sp_pak1.pk3
sdcard\RTCWQuest\Main\sp_pak2.pk3
sdcard\RTCWQuest\Main\sp_pak3.pk3
sdcard\RTCWQuest\Main\sp_pak4.pk3
sdcard\RTCWQuest\Main\sp_vpak5.pk3
sdcard\RTCWQuest\Main\sp_vpak6.pk3
sdcard\RTCWQuest\Main\sp_vpak7.pk3
sdcard\RTCWQuest\Main\sp_vpak8.pk3
sdcard\RTCWQuest\Main\sp_vpak9.pk3
sdcard\RTCWQuest\Main\z_pak1.pk3</code>

===== QuakeQuest =====

  * https://www.quakevr.com/
  * https://sidequestvr.com/app/93/quakequest
  * https://github.com/DrBeef/QuakeQuest

  * Both pak files from Q1 install
  * https://docs.google.com/document/d/1npgZjIF33fKJdthm6xSnlIbrbB0mM0Cd6ZskzE3t5NM/edit

  * 2021/08/31: 812 MB

<code>
sdcard\QuakeQuest\id1\IP_Weapons_Ruohis_Key_Plague(altered).pk3
sdcard\QuakeQuest\id1\mindgrid_audio_sound.pk3
sdcard\QuakeQuest\id1\PAK0.pk3
sdcard\QuakeQuest\id1\PAK1.pk3
sdcard\QuakeQuest\id1\QR_2048_QuakeBestiary_Alfader_Nergal.pk3
sdcard\QuakeQuest\id1\QRP_item_textures_v.0.73_dp.pk3
sdcard\QuakeQuest\id1\QRP_map_textures_v.1.00.pk3</code>

===== Lambda1VR =====

  * https://www.lambda1vr.com/
  * https://sidequestvr.com/app/124/lambda1vr-half-life-in-vr
  * https://github.com/DrBeef/Lambda1VR

  * Entire ''valve'' folder
  * Entire ''valve_hd'' folder dropped into ''valve'' folder
  * ''HL_Gold_HD'' added
  * ''commandline.txt'' optimized settings with HL_Gold_HD

  * 2021/08/31: 2.12 GB

<code>
sdcard\xash\HL_Gold_HD\*
sdcard\xash\valve\*
sdcard\xash\commandline.txt</code>

===== Doom3Quest =====

  * https://www.doom3quest.com/
  * https://sidequestvr.com/app/2651
  * https://github.com/DrBeef/Doom3Quest

  * Just the base files needed (no extras or mods)

  * 2021/08/31: 1.56 GB

<code>
sdcard\Doom3Quest\base\game00.pk4
sdcard\Doom3Quest\base\game01.pk4
sdcard\Doom3Quest\base\game02.pk4
sdcard\Doom3Quest\base\game03.pk4
sdcard\Doom3Quest\base\pak000.pk4
sdcard\Doom3Quest\base\pak001.pk4
sdcard\Doom3Quest\base\pak002.pk4
sdcard\Doom3Quest\base\pak003.pk4
sdcard\Doom3Quest\base\pak004.pk4
sdcard\Doom3Quest\base\pak005.pk4
sdcard\Doom3Quest\base\pak006.pk4
sdcard\Doom3Quest\base\pak007.pk4
sdcard\Doom3Quest\base\pak008.pk4</code>

===== QuestZDoom =====

  * https://www.questzdoom.com/
  * https://sidequestvr.com/app/796
  * https://github.com/DrBeef/QuestZDoom

  * 2021/08/31: 63 MB

<code>
sdcard\QuestZDoom\wads\DOOM.WAD
sdcard\QuestZDoom\wads\DOOM2.WAD
sdcard\QuestZDoom\wads\HERETIC.WAD
sdcard\QuestZDoom\wads\HEXDD.WAD
sdcard\QuestZDoom\wads\HEXEN.WAD</code>

===== Quake3Quest =====

  * https://quake3.quakevr.com/
  * https://sidequestvr.com/app/8601/quake3quest
  * https://github.com/DrBeef/ioq3quest

  * 2022/05/18: 858 MB

<code>
sdcard\ioquake3Quest\baseq3\pak0.pk3
sdcard\ioquake3Quest\baseq3\pak1.pk3
sdcard\ioquake3Quest\baseq3\pak2.pk3
sdcard\ioquake3Quest\baseq3\pak3.pk3
sdcard\ioquake3Quest\baseq3\pak4.pk3
sdcard\ioquake3Quest\baseq3\pak5.pk3
sdcard\ioquake3Quest\baseq3\pak6.pk3
sdcard\ioquake3Quest\baseq3\pak7.pk3
sdcard\ioquake3Quest\baseq3\pak8.pk3
sdcard\ioquake3Quest\missionpack\pak0.pk3
sdcard\ioquake3Quest\missionpack\pak1.pk3
sdcard\ioquake3Quest\missionpack\pak2.pk3
sdcard\ioquake3Quest\missionpack\pak3.pk3</code>

====== Saved Game Data ======

===== Beat Saber =====

<code>
sdcard\Android\data\com.beatgames.beatsaber\files\AvatarData.dat
sdcard\Android\data\com.beatgames.beatsaber\files\PlayerData.dat</code>

===== Until You Fall =====

<code>
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\CampaignSaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\EconomySaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\RunSaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\SettingsSaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\TutorialSaveData.cls</code>

===== Gladius =====

  * Need to re-set Gladiator name on first-start, but progress will be loaded

<code>
sdcard\UE4Game\GladiusQuest\GladiusQuest\Saved\SaveGames\GladiusInstance.sav</code>