Differences

This shows you the differences between two versions of the page.

--- devices:netgear_r6260_openwrt [2024/06/14 06:06] – Sean Rhone
+++ devices:netgear_r6260_openwrt [2024/08/13 19:37] (current) – removed Sean Rhone
@@ Line 1: / Line 1: @@
-====== Information ======
-  * [[https://www.netgear.com/home/products/networking/wifi-routers/R6260.aspx|NETGEAR R6260]]
-  * [[https://openwrt.org|OpenWrt]]
-  * [[https://openwrt.org/toh/netgear/r6260|OpenWrt Device Page]]
-  * [[https://openwrt.org/releases/snapshot|Snapshot]]
-===== Notes =====
-  * 2021/04/28: Dropping invalid packets (firewall) causes an Oculus Quest 2 to not load it's own store/home page
-  * 2021/06/14: Enabling ''Use broadcast flag'' causes WAN not to work (Comcast/Xfinity)
-  * 2021/06/29: Enabling ''802.11w Management Frame Protection'' on 2.4GHz caused a NC200 to not be able to connect
-  * Stock firmware reports ''d(149)+p(153)+d(157)+d(161)'' for 5GHz channels with ''153'' selected and ''11(P)+7(S)'' for 2.4GHz with ''11'' selected
-====== Snapshot ======
-==== Links ====
-  * ''ramips/mt7621''
-  * [[https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-netgear_r6260-squashfs-factory.img|factory.bin]]
-  * [[https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-netgear_r6260-squashfs-sysupgrade.bin|sysupgrade.bin]]
-==== sysupgrade ====
-  * This downloads the latest ''sysupgrade.bin'' and installs it
-  ssh root@192.168.1.1
-  rm -f '/tmp/sysupgrade.img' && sync && sysupgrade --force -n -v 'https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-netgear_r6260-squashfs-sysupgrade.bin'
-  del %UserProfile%"\.ssh\known_hosts" && ping -t "192.168.1.1"
-  rm -Rf ~/'.ssh' && ping '192.168.1.1'
-===== Packages =====
-==== LuCI ====
-  * [[https://openwrt.org/docs/guide-user/luci/luci.essentials|LuCI]] ((snapshot images don't include LuCI, so it needs installed on **every** clean snapshot install))
-  ssh root@192.168.1.1
-  sync && passwd
-  opkg update && opkg install 'luci' && sync
-====== LuCI ======
-  * http://192.168.1.1
-===== Scheduled Reboot =====
-  * https://www.albertogonzalez.net/how-to-reboot-nightly-your-openwrt-router/
-  * https://openwrt.org/docs/guide-user/base-system/cron#periodic_reboot
-  * http://192.168.1.1/cgi-bin/luci/admin/system/crontab
-<code>
-# Restart 5:00 AM
-5 * * * sleep '70' && touch '/etc/banner' && reboot</code>
-===== DHCP =====
-  * Network -> Interfaces -> LAN -> DHCP Server -> Limit
-===== DNS =====
-  * [[notes:dns_servers#for_families|1.1.1.1 for Families]], see [[notes:dns_servers]] for other addresses
-  * This advertises an upstream DNS server directly to clients instead of the router
-==== IPv4 ====
-  * Network -> Interfaces -> LAN -> DHCP Server -> Advanced Settings -> DHCP-Options
-  * :!: The ''6,'' is intentional (([[https://old.reddit.com/r/openwrt/comments/hr6xig/how_to_set_openwrt_to_use_1111_dns_for_example/fylsewz/?context=3|Reddit]], [[https://datatracker.ietf.org/doc/html/rfc2132#section-3.8|RFC 2132]]))
-<code>6,1.1.1.2,1.0.0.2</code>
-=== IPs ===
-<code>1.1.1.2</code>
-<code>1.0.0.2</code>
-==== IPv6 ====
-  * Network -> Interfaces -> LAN -> DHCP Server -> Advanced Settings -> IPv6 Settings -> Announced IPv6 DNS servers
-<code>2606:4700:4700::1112</code>
-<code>2606:4700:4700::1002</code>
-===== Firewall =====
-  * See [[notes:port_forwards]]
-====== Recovery ======
-===== nmrpflash =====
-  * https://github.com/jclehner/nmrpflash
-  * Reason for the ''libpcap'' command: https://github.com/jclehner/nmrpflash/issues/27
-  * :!: If using an OpenWRT image, use the ''factory'' image
-  sudo ln -sv 'libpcap.so.1' '/usr/lib64/libpcap.so.0.8'
-  sudo ~/'Downloads/nmrpflash-0.9.16-linux/nmrpflash' -L
-  sudo ~/'Downloads/nmrpflash-0.9.16-linux/nmrpflash' -i 'enp6s0' -f ~/'Downloads/openwrt-ramips-mt7621-netgear_r6260-squashfs-factory.img'
-  sudo ~/'Downloads/nmrpflash-0.9.16-linux/nmrpflash' -i 'enp6s0' -f ~/'Downloads/R6260-V1.1.0.84_1.0.1/R6260-V1.1.0.84_1.0.1.img'