Differences

This shows you the differences between two versions of the page.

--- devices:srn21c [2017/10/29 16:03] – Sean Rhone
+++ devices:srn21c [2024/08/13 19:55] (current) – removed Sean Rhone
@@ Line 1: / Line 1: @@
-====== Information ======
-  * Seagate Personal Cloud ((http://www.seagate.com/manuals/network-storage/seagate-personal-cloud))
-  * Debian ((https://www.debian.org)) ((https://wiki.debian.org/InstallingDebianOn/Seagate/PersonalCloud))
-  * vsftpd ((https://security.appspot.com/vsftpd.html))
-  * For whatever reason, the bootloader settings don't stick when the NAS looses power for a bit; these instructions work, but not reliable
-====== TFTP Server ======
-  * A TFTP server is needed to serve files to uBoot
-  sudo dnf install 'tftp-server'
-  sudo firewall-cmd --add-service='tftp'
-====== Debian Installer Files ======
-===== uImage =====
-****
-  sudo wget -O '/var/lib/tftpboot/uImage' 'http://ftp.debian.org/debian/dists/stretch/main/installer-armhf/current/images/network-console/seagate/personal-cloud/uImage'
-===== uInitrd =====
-****
-  sudo wget -O '/var/lib/tftpboot/uInitrd' 'http://ftp.debian.org/debian/dists/stretch/main/installer-armhf/current/images/network-console/seagate/personal-cloud/uInitrd'
-===== Device Tree Blob =====
-****
-  sudo wget -O '/var/lib/tftpboot/armada-370-seagate-personal-cloud.dtb' 'http://ftp.debian.org/debian/dists/stretch/main/installer-armhf/current/images/device-tree/armada-370-seagate-personal-cloud.dtb'
-====== clunc ======
-===== Information =====
-  * Needed to communicate with uBoot shell over network
-===== Acquire and Compile =====
-****
-  git clone -b 'master' 'http://git.lacie-nas.org/clunc.git' ~/'clunc' && cd ~/'clunc' && make && sync
-===== Execute =====
-  * This needs to be running before the NAS is given power
-  * Getting the IP for the NAS in this state is tricky; had to set a static ARP from AdvancedTomato GUI
-  cd ~/'clunc' && ~/'clunc' -vi '192.168.1.129'
-===== Debian Installer Initialize =====
-  * Following commands pulls the Debian installer files from the TFTP server and executes them to initiate the installer
-  setenv serverip 192.168.1.151
-  setenv ipaddr 192.168.1.129
-  tftpboot 0x2000000 uImage
-  tftpboot 0x5100000 uInitrd
-  tftpboot 0x5000000 armada-370-seagate-personal-cloud.dtb
-  setenv fdt_high 0xffffffff
-  setenv initrd_high 0xffffffff
-  bootm 0x2000000 0x5100000 0x5000000
-====== Debian Installer ======
-  * No real tricks to install; just follow on-screen instructions
-====== Debian Installer Finalize ======
-===== clunc Execute =====
-  * This needs to be running before the Debian installer reboots at the last step
-  * IP should theoretically be the same as before
-  cd ~/'clunc' && ~/'clunc' -vi '192.168.1.129'
-===== uBoot =====
-  * Following commands tell uBoot how to boot Debian on its own
-  setenv debian_kernel_addr 0x2000000
-  setenv debian_initrd_addr 0x5100000
-  setenv debian_dtb_addr 0x5000000
-  setenv initrd_high 0xffffffff
-  setenv fdt_high 0xffffffff
-  setenv debian_boot_part 1
-  setenv debian_kernel_img /uImage
-  setenv debian_initrd_img /uInitrd
-  setenv debian_dtb_img /dtb
-  setenv debian_bootargs setenv bootargs ${console}
-  setenv debian_load_image 'ext2load ${disk_iface} ${disk_num}:${boot_part} ${kern_addr} ${debian_kernel_img} && iminfo ${debian_kernel_addr}; ext2load ${disk_iface} ${disk_num}:${boot_part} ${debian_initrd_addr} ${debian_initrd_img}; ext2load ${disk_iface} ${disk_num}:${boot_part} ${debian_dtb_addr} ${debian_dtb_img}'
-  setenv debian_boot 'hdd start; ide reset; setenv boot_part ${debian_boot_part}; for disk in ${disk_list}; do run disk_expand; echo Booting Debian from disk ${disk}...; run debian_load_image; run debian_bootargs; bootm ${debian_kernel_addr} ${debian_initrd_addr} ${debian_dtb_addr}; done'
-  setenv bootcmd run debian_boot
-  saveenv
-  run bootcmd
-====== Settings ======
-  * All interactions with Debian need to be done through SSH obviously and with ''su''
-===== Root =====
-****
-  su
-===== Update Packages =====
-****
-  apt update && apt full-upgrade -y && apt autoremove -y && apt clean && sync
-===== Change hostname =====
-****
-  hostnamectl set-hostname 'x'
-===== Static IP =====
-  nano '/etc/network/interfaces'
-<code>
-#iface eth0 inet dhcp
-iface eth0 inet static
-address 192.168.1.154
-netmask 255.255.255.0
-gateway 192.168.1.1
-dns-nameservers 84.200.69.80 84.200.70.40</code>
-===== vsftpd =====
-==== Install ====
-****
-  apt install 'vsftpd'
-==== Directory ====
-****
-  mkdir -p '/srv/ftp/NAS' && chgrp -R 'ftp' '/srv/ftp/NAS'
-==== Configure ====
-  nano '/etc/vsftpd.conf' && systemctl restart 'vsftpd'
-  write_enable=YES
-  utf8_filesystem=YES
-==== Create Users ====
-  adduser 'voidscream'
-===== Automatic Updates =====
-==== Service ====
-  nano '/etc/systemd/system/debian-up.service'
-  [Service]
-  Type=oneshot
-  ExecStartPre='/usr/bin/apt' clean
-  ExecStart='/usr/bin/apt' update
-  ExecStart='/usr/bin/apt' full-upgrade -y
-  ExecStart='/usr/bin/apt' autoremove -y
-  ExecStartPost='/bin/sync'
-  ExecStartPost='/bin/systemctl' reboot
-==== Timer ====
-  nano '/etc/systemd/system/debian-up.timer' && systemctl daemon-reload && systemctl enable 'debian-up.timer' --now
-  [Unit]
-  Description=Software Package Maintenance and Updater
-  After=network-online.target
-  Wants=network-online.target
-  [Timer]
-  OnCalendar=weekly
-  Persistent=true
-  [Install]
-  WantedBy=timers.target