Differences

This shows you the differences between two versions of the page.

--- linux:notes:rpi4_ostw [2026/06/14 17:34] – created Sean Rhone
+++ linux:notes:rpi4_ostw [2026/07/15 13:26] (current) – Sean Rhone
@@ Line 1: / Line 1: @@
+  * https://en.opensuse.org/HCL:Raspberry_Pi4
+  * https://download.opensuse.org/ports/aarch64/tumbleweed/appliances/openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.aarch64.raw.xz
+  * https://download.opensuse.org/ports/aarch64/tumbleweed/appliances/openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.aarch64.raw.xz.sha256
+  openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.aarch64-2026.04.30-Snapshot20260616.raw
   sudo -e '/boot/efi/extraconfig.txt'
@@ Line 6: / Line 12: @@
 dtoverlay=disable-wifi
 disable_splash=1
+disable_fw_kms_setup=1
 # Tweaks
@@ Line 12: / Line 19: @@
 over_voltage=15
 arm_freq=2100
-core_freq=250
 max_usb_current=1
-# rpi-eeprom-update
-dtparam=spi=on
-dtoverlay=audremap
-dtoverlay=spi-gpio40-45
 # End</code>
-  sudo '/usr/bin/rpi-eeprom-config' -e
+====== EEPROM ======
+  * TODO: ''USB_MSD_EXCLUDE_VID_PID'' ([[https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#USB_MSD_EXCLUDE_VID_PID|info]])
+  nano '/tmp/bootconf.txt'
 <code>
@@ Line 31: / Line 36: @@
 NET_INSTALL_AT_POWER_ON=0</code>
-  sudo zypper install 'flashrom'
+  * https://github.com/raspberrypi/rpi-eeprom/tree/master/firmware-2711/latest
+  * ''pieeprom-2026-05-17.bin''
+  wget -O '/tmp/pieeprom-latest.bin' 'https://github.com/raspberrypi/rpi-eeprom/raw/refs/heads/master/firmware-2711/latest/pieeprom-2026-05-17.bin'
+  '/usr/bin/rpi-eeprom-config' '/tmp/pieeprom-latest.bin' --config '/tmp/bootconf.txt' --out '/tmp/pieeprom-latest-custom.bin'
+  sudo rpi-eeprom-update -d -f '/tmp/pieeprom-latest-custom.bin'
+  systemctl reboot
+  sudo rpi-eeprom-update -r
+  sudo rpi-eeprom-update
-  RPI_EEPROM_USE_FLASHROM='1' '/usr/bin/rpi-eeprom-update'
+<code>CURRENT: Sun May 17 07:13:18 PM UTC 2026 (1779045198)</code>