Differences

This shows you the differences between two versions of the page.

--- devices:ea6700_dd-wrt [2018/12/04 19:20] – external edit 127.0.0.1
+++ devices:ea6700_dd-wrt [2024/08/13 19:39] (current) – removed Sean Rhone
@@ Line 1: / Line 1: @@
-====== Information ======
-  * Linksys EA6700 ((https://www.linksys.com/gb/p/P-EA6700))
-  * Kong DD-WRT Builds ((''dd-wrt.v24-K3_AC_ARM_STD.bin'' from http://www.desipro.de/ddwrt/K3-AC-Arm/))
-====== Settings ======
-===== Setup =====
-==== Basic Setup ====
-  * Router Name: Wraeclast
-  * Shortcut Forwarding Engine: Enabled
-  * Static DNS 1: 185.121.177.177
-  * Static DNS 2: 169.239.202.202
-  * Static DNS 3: 185.121.177.177
-  * Time Zone: America/New York
-  * Server IP/Name: 0.north-america.pool.ntp.org
-==== IPv6 ====
-  * IPv6: Enabled
-  * IPv6 Type: DHCPv6 with Prefix Delegation
-  * Static DNS 1: 2a05:dfc7:5::53
-  * Static DNS 2: 2a05:dfc7:5::5353
-==== DDNS ====
-  * https://www.namecheap.com/support/knowledgebase/article.aspx/9356/11/how-to-configure-a-ddwrt-router
-  * :!: Make sure to change ''(NameCheap DDNS Password)'' to the actual DDNS password in both ''Password'' and ''URL'' fields
-  * DDNS Service: Custom
-  * DYNDNS Server:
-  * Username:
-  * Password:
-  * Hostname:
-  * URL:
-  dynamicdns.park-your-domain.com
-  realmofespionage.xyz
-  (NameCheap DDNS Password)
-  @
-  /update?domain=realmofespionage.xyz&password=(NameCheap DDNS Password)&host=
-===== Wireless =====
-==== Basic Settings ====
-=== wl0 [2.4 GHz] ===
-  * Wireless Network Mode: N-Only
-  * Wireless Network Name (SSID): The Crossroads (2.4GHz)
-  * Wireless Channel: 11 - 2.462 GHz
-  * Channel Width: Wide HT40 (40 MHz)
-  * Extension Channel: lower
-=== Virtual Interface wl0.1 [2.4 GHz] ===
-  * Wireless Network Name (SSID): The Lower Prison (2.4GHz ISO)
-  * Network Configuration: Unbridged
-  * Net Isolation: Enabled ((prevents clients on this AP from accessing LAN resources; allows WAN/internet usage still))
-  * IP Address: 192.168.2.1
-  * Subnet Mask: 255.255.255.0
-=== wl1 [5GHz] ===
-  * Wireless Network Mode: AC-Only ((very few old devices need AC/N-Mixed such as Samsung Smart TV))
-  * Wireless Network Name (SSID): Highgate (5GHz)
-  * Wireless Channel: 48 - 5.240 GHz ((Fire TV Sticks need some low 5GHz channel))
-  * Channel Width: VHT80 (80 MHz)
-  * Extension Channel: upper upper
-  * Explicit Beamforming: Enabled
-  * Implicit Beamforming: Enabled
-==== Wireless Security ====
-  * Applies to ''wl0'', ''wl0.1'', and ''wl1''
-  * Security Mode: WPA2 Personal
-  * WPA Algorithms: AES
-  * WPA Shared Key: (usual)
-==== WL-Advanced ====
-  * Applies to both ''WL0'' and ''WL1''
-  * TX Power: Manual -> 999
-===== Services =====
-==== Services ====
-  * ttraff Daemon: Disabled
-  * Additional DNSMasq Options: ((only required if the virtual wireless AP exists))
-<code>
-interface=wl0.1
-dhcp-option=wl0.1,3,192.168.2.1
-dhcp-range=wl0.1,192.168.2.100,192.168.2.125,255.255.255.0,12h</code>
-===== Security =====
-==== Firewall ====
-  * Enable the following:
-  * Limit SSH Access
-  * Limit Telnet Access
-  * Limit PPTP Server Access
-  * Limit FTP Server Access
-===== Access Restrictions =====
-==== Policy 1 ====
-  * Policy Name: Seagate NAS
-  * List of Clients -> MAC 01: (Seagate NAS Ethernet MAC)
-  * PCs: Deny
-==== Policy 2 ====
-  * Policy Name: Samsung TV
-  * List of Clients -> MAC 01: (Samsung TV Wifi MAC)
-  * PCs: Deny
-==== Policy 3 ====
-  * Policy Name: Thistlesage RuneAudio
-  * List of Clients -> MAC 01: (Raspberry Pi Ethernet MAC)
-  * PCs: Deny
-==== Policy 4 ====
-  * Policy Name: Kole HP Printer
-  * List of Clients -> MAC 01: (HP Printer Ethernet MAC)
-  * List of Clients -> MAC 02: (HP Printer Wifi MAC)
-  * PCs: Deny
-===== NAT / QoS =====
-==== Port Forwarding ====
-  * HTTP, 80, TCP, 153
-  * HTTPS, 443, TCP, 153
-===== Administration =====
-==== Keep Alive ====
-  * Schedule Reboot: Enabled
-  * At a set Time: 05:00 Everyday
-====== Telnet ======
-===== Connect =====
-  * Username is ''root'' with admin password
-  telnet '192.168.1.1'
-===== Update =====
-==== TFTP ====
-  tftp 192.168.1.1
-  binary
-  rexmt 1
-  timeout 60
-  put firmware.bin
-==== Stable ====
-  * http://www.desipro.de/ddwrt/K3-AC-Arm/
-  wget -O '/tmp/firmware.bin' 'http://www.desipro.de/ddwrt/K3-AC-Arm/dd-wrt.v24-K3_AC_ARM_STD.bin' && sync && mtd write '/tmp/firmware.bin' 'linux'
-==== Test ====
-  * http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/
-  wget -O '/tmp/firmware.bin' 'http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/dd-wrt.v24-K3_AC_ARM_STD.bin' && sync && mtd write '/tmp/firmware.bin' 'linux'
-==== NVRAM Wipe ====
-  * May be necessary after an update
-  * :!: This will wipe out all router settings and everything will need set back up again
-  erase nvram
-==== Reboot ====
-****
-  sync && reboot
-===== Overclock =====
-==== Get Current Clocks ====
-  * Likely ''800,533'' by-default
-  nvram get 'clkfreq'
-==== Set Clocks ====
-****
-  nvram set 'clkfreq'='1200,600' && nvram commit
-====== TODO ======
-Setup > advanced routing
-This Blocks Google DNS
-Google Primary DNS and Google Secondary DNS (1 and 2)
-Metric: 2
-Destination: Primary = 8.8.8.8 Secondary = 8.8.4.4
-Subnet Mask: 255.255.255.255
-Gateway: 192.168.1.1
-Interface: LAN and WLAN
-http://svn.dd-wrt.com/ticket/1483