User Tools

Site Tools


devices:linksys_ea6350_v3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
devices:linksys_ea6350_v3 [2022/08/08 11:50] – Recovery Sean Rhonedevices:linksys_ea6350_v3 [2022/12/12 02:25] (current) Sean Rhone
Line 14: Line 14:
  
 ==== Links ==== ==== Links ====
 +
 +  * :!: 2022: OpenWRT snapshot builds were disabled at some point, see https://github.com/openwrt/openwrt/pull/11405
  
   * [[https://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_ea6350v3-squashfs-factory.bin|factory.bin]]   * [[https://downloads.openwrt.org/snapshots/targets/ipq40xx/generic/openwrt-ipq40xx-generic-linksys_ea6350v3-squashfs-factory.bin|factory.bin]]
Line 131: Line 133:
  
 <code>The Beacon (5GHz)</code> <code>The Beacon (5GHz)</code>
 +
 +===== Firewall =====
 +
 +  * See [[notes:port_forwards]]
  
 ====== Recovery ====== ====== Recovery ======
Line 137: Line 143:
  
   * https://openwrt.org/toh/linksys/ea8300#revert_to_stock   * https://openwrt.org/toh/linksys/ea8300#revert_to_stock
 +  * OpenWRT -> Linksys
  
 ==== Download Stock Firmware ==== ==== Download Stock Firmware ====
  
-****+  https://www.linksys.com/support-article?articleNum=148481 
 +  ''3.1.10.191322'' from 2018 is the latest as of 2022/12/09 
 + 
 +  ssh 'root'@'192.168.1.1'
  
   wget 'https://downloads.linksys.com/downloads/firmware/FW_EA6350v3_3.1.10.191322_prod.img'   wget 'https://downloads.linksys.com/downloads/firmware/FW_EA6350v3_3.1.10.191322_prod.img'
Line 148: Line 158:
   * 11 = ''kernel''   * 11 = ''kernel''
   * 13 = ''alt_kernel''   * 13 = ''alt_kernel''
-  * :!: Flash operations should be done on the kernel **not** mentioned in the following command ((so if ''13'' is reported, ''mtd'' commands should apply to ''kernel''))+  * :!: Flash operations should be done on the kernel **not** mentioned in the following command ((so if ''13'' for ''alt_kernel'' is reported, ''mtd'' commands should be applied to ''kernel''))
  
-  cat /sys/devices/virtual/ubi/ubi0/mtd_num+  cat '/sys/devices/virtual/ubi/ubi0/mtd_num'
  
 ==== Erase Non-current Firmware Partition ==== ==== Erase Non-current Firmware Partition ====
  
-  mtd erase kernel+  mtd erase 'kernel'
  
-  mtd erase alt_kernel+  mtd erase 'alt_kernel'
  
 ==== Flash Stock Firmware ==== ==== Flash Stock Firmware ====
  
-  mtd write FW_EA6350v3_3.1.10.191322_prod.img kernel+  mtd write 'FW_EA6350v3_3.1.10.191322_prod.img' 'kernel'
  
-  mtd write FW_EA6350v3_3.1.10.191322_prod.img alt_kernel+  mtd write 'FW_EA6350v3_3.1.10.191322_prod.img' 'alt_kernel'
  
 ==== Boot Stock Firmware ==== ==== Boot Stock Firmware ====
Line 169: Line 179:
   * 2 = ''alt_kernel''   * 2 = ''alt_kernel''
  
-  fw_setenv boot_part 1+  fw_setenv 'boot_part' '1'
  
-  fw_setenv boot_part 2+  fw_setenv 'boot_part' '2'
  
   sync && reboot   sync && reboot
  
/var/www/wiki/data/attic/devices/linksys_ea6350_v3.1659973807.txt.gz · Last modified: 2022/08/08 11:50 by Sean Rhone