Differences

This shows you the differences between two versions of the page.

--- linux:notes:x86_energy_perf_policy [2024/12/30 22:55] – Ubuntu -> Fedora Sean Rhone
+++ linux:notes:x86_energy_perf_policy [2025/04/25 21:53] (current) – [Prerequisites] Sean Rhone
@@ Line 1: / Line 1: @@
-====== x86_energy_perf_policy ======
+====== Information ======
-  watch --interval '0.5' grep \'cpu MHz\' '/proc/cpuinfo'
+  * ''x86_energy_perf_policy'' as udev rule
+  * Alternative to ''tuned'', ''tlp'', etc
-  * Check
+===== Prerequisites =====
-  sudo x86_energy_perf_policy
+  * [[linux;distros;opensuse_tumbleweed_gnome|openSUSE Tumbleweed (GNOME)]]
-  * Max Performance
+  sudo zypper remove --clean-deps 'tuned'
-  sudo x86_energy_perf_policy --all 'performance' --turbo-enable '1' --force
+  sudo zypper addlock 'tuned'
-====== Scripts ======
+  sudo zypper install 'cpupower'
-  * [[linux:distros:fedora_workstation_gnome|Fedora Workstation]]
+===== Check =====
-===== TuneD =====
+  watch --interval '0.5' grep \'cpu MHz\' '/proc/cpuinfo'
-  * Automatic power-management like ''tlp''
+  sudo x86_energy_perf_policy
-  * Required to remove ''tuned'' so it doesn't override below udev rule
-  sudo dnf remove 'tuned'
+===== Max Perf =====
+****
+  sudo x86_energy_perf_policy --all 'performance' --turbo-enable '1' --force
+====== Scripts ======
 ===== AC =====
-  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/ac-power.sh' && sudo restorecon -F -I '/etc/udev/scripts.d/ac-power.sh' && sudo chmod +x '/etc/udev/scripts.d/ac-power.sh'
+  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/ac-power.sh' && sudo restorecon -F -I -R '/etc/udev/scripts.d' && sudo chmod +x '/etc/udev/scripts.d/ac-power.sh'
 <code>
 #!/bin/bash
+x86_energy_perf_policy --all 'performance' --turbo-enable '1' --force</code>
-# AC
-x86_energy_perf_policy --all 'performance' --turbo-enable '1' --force
-# End</code>
-  '/etc/udev/scripts.d/ac-power.sh'
 ===== Battery =====
-  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/battery-power.sh' && sudo restorecon -F -I '/etc/udev/scripts.d/battery-power.sh' && sudo chmod +x '/etc/udev/scripts.d/battery-power.sh'
+  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/battery-power.sh' && sudo restorecon -F -I -R '/etc/udev/scripts.d' && sudo chmod +x '/etc/udev/scripts.d/battery-power.sh'
 <code>
 #!/bin/bash
+x86_energy_perf_policy --all 'balance-power' --turbo-enable '0' --force</code>
-# Battery
-x86_energy_perf_policy --all 'balance-power' --turbo-enable '0' --force
-# End</code>
-  '/etc/udev/scripts.d/battery-power.sh'
 ===== udev Rule =====
@@ Line 55: / Line 49: @@
 <code>
-# AC
 ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="1", RUN+="/etc/udev/scripts.d/ac-power.sh"
+ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="0", RUN+="/etc/udev/scripts.d/battery-power.sh"</code>
-# Battery
-ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="0", RUN+="/etc/udev/scripts.d/battery-power.sh"
-# End</code>
 ===== Check =====