Differences

This shows you the differences between two versions of the page.

--- linux:notes:x86_energy_perf_policy [2025/04/25 21:45] – Sean Rhone
+++ linux:notes:x86_energy_perf_policy [2025/08/25 23:55] (current) – Sean Rhone
@@ Line 8: / Line 8: @@
   * [[linux;distros;opensuse_tumbleweed_gnome|openSUSE Tumbleweed (GNOME)]]
-  sudo zypper install 'cpupower'
+  sudo zypper remove --clean-deps 'tuned'
-===== Check =====
+  sudo zypper addlock 'tuned'
-  watch --interval '0.5' grep \'cpu MHz\' '/proc/cpuinfo'
+  sudo zypper install 'cpupower'
-  sudo x86_energy_perf_policy
-===== Max Perf =====
-****
   sudo x86_energy_perf_policy --all 'performance' --turbo-enable '1' --force
@@ Line 26: / Line 20: @@
 ===== AC =====
-  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/ac-power.sh' && sudo restorecon -F -I '/etc/udev/scripts.d/ac-power.sh' && sudo chmod +x '/etc/udev/scripts.d/ac-power.sh'
+  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/ac-power.sh' && sudo chmod +x '/etc/udev/scripts.d/ac-power.sh'
 <code>
 #!/bin/bash
-x86_energy_perf_policy --all 'performance' --turbo-enable '1' --force</code>
+'/usr/bin/x86_energy_perf_policy' --all 'performance' --turbo-enable '1' --force
+# End</code>
 ===== Battery =====
-  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/battery-power.sh' && sudo restorecon -F -I '/etc/udev/scripts.d/battery-power.sh' && sudo chmod +x '/etc/udev/scripts.d/battery-power.sh'
+  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/battery-power.sh' && sudo chmod +x '/etc/udev/scripts.d/battery-power.sh'
 <code>
 #!/bin/bash
-x86_energy_perf_policy --all 'balance-power' --turbo-enable '0' --force</code>
+'/usr/bin/x86_energy_perf_policy' --all 'balance-power' --turbo-enable '0' --force
+# End</code>
 ===== udev Rule =====
-  sudo -e '/etc/udev/rules.d/99-power.rules' && sudo restorecon -F -I '/etc/udev/rules.d/99-power.rules' && sudo udevadm control --reload
+  sudo -e '/etc/udev/rules.d/99-power.rules' && sudo udevadm control --reload
 <code>
+# AC
 ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="1", RUN+="/etc/udev/scripts.d/ac-power.sh"
-ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="0", RUN+="/etc/udev/scripts.d/battery-power.sh"</code>
+# Battery
+ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="0", RUN+="/etc/udev/scripts.d/battery-power.sh"
+# End</code>
 ===== Check =====