Differences

This shows you the differences between two versions of the page.

--- linux:notes:x86_energy_perf_policy [2025/04/26 19:01] – Sean Rhone
+++ linux:notes:x86_energy_perf_policy [2025/07/03 22:23] (current) – Sean Rhone
@@ Line 6: / Line 6: @@
 ===== Prerequisites =====
-  * [[linux;distros;opensuse_tumbleweed_gnome|openSUSE Tumbleweed (GNOME)]]
+  * [[linux;distros;ubuntu|Ubuntu]]
-  sudo zypper remove --clean-deps 'tuned'
+  sudo apt remove 'power-profiles-daemon'
-  sudo zypper addlock 'tuned'
-  sudo zypper install 'cpupower'
 ===== Check =====
@@ Line 30: / Line 26: @@
 ===== AC =====
-  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/ac-power.sh' && sudo restorecon -F -I -R '/etc/udev/scripts.d' && sudo chmod +x '/etc/udev/scripts.d/ac-power.sh'
+  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/ac-power.sh' && sudo chmod +x '/etc/udev/scripts.d/ac-power.sh'
 <code>
 #!/bin/bash
-x86_energy_perf_policy --all 'performance' --turbo-enable '1' --force
+'/usr/bin/x86_energy_perf_policy' --all 'performance' --turbo-enable '1' --force
 # End</code>
 ===== Battery =====
-  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/battery-power.sh' && sudo restorecon -F -I -R '/etc/udev/scripts.d' && sudo chmod +x '/etc/udev/scripts.d/battery-power.sh'
+  sudo mkdir -p '/etc/udev/scripts.d' && sudo -e '/etc/udev/scripts.d/battery-power.sh' && sudo chmod +x '/etc/udev/scripts.d/battery-power.sh'
 <code>
 #!/bin/bash
-x86_energy_perf_policy --all 'balance-power' --turbo-enable '0' --force
+'/usr/bin/x86_energy_perf_policy' --all 'balance-power' --turbo-enable '0' --force
 # End</code>
 ===== udev Rule =====
-  sudo -e '/etc/udev/rules.d/99-power.rules' && sudo restorecon -F -I '/etc/udev/rules.d/99-power.rules' && sudo udevadm control --reload
+  sudo -e '/etc/udev/rules.d/99-power.rules' && sudo udevadm control --reload
 <code>
+# AC
 ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="1", RUN+="/etc/udev/scripts.d/ac-power.sh"
+# Battery
 ACTION=="add|change", SUBSYSTEM=="power_supply", ATTRS{type}=="Mains", ATTRS{online}=="0", RUN+="/etc/udev/scripts.d/battery-power.sh"
 # End</code>