• xda-developers

• This allows access to some Android-specific settings
• This can be used to clear cache data for apps
• This can be used to change the timezone if it's incorrect

adb shell am start -a android.intent.action.VIEW -d com.oculus.tv -e uri com.android.settings/.DevelopmentSettings com.oculus.vrshell/.MainActivity

adb shell "setprop debug.oculus.refreshRate 120"

• Power Management
• This disables dynamic clocks and forces max clocks on CPU and GPU
• This will increase heat and battery/power usage
• There's an undocumented level 5: https://old.reddit.com/r/OculusQuest/comments/11e1u2z/quest_2_undocumented_5th_cpugpu_level/

adb shell "setprop debug.oculus.cpuLevel 5"

adb shell "setprop debug.oculus.gpuLevel 5"

adb shell "setprop debug.oculus.adaclocks.force 0"

adb shell "setprop debug.oculus.phaseSync 1"

• Sets CPU and GPU performance level to 5, enables Phase Sync globally, and minor Developer Options tweaks

adb shell "setprop debug.oculus.cpuLevel 5 && setprop debug.oculus.gpuLevel 5 && setprop debug.oculus.adaclocks.force 0 && setprop debug.oculus.phaseSync 1 && settings put global always_finish_activities 0 && settings put global wifi_scan_throttle_enabled 1 && settings put global window_animation_scale 0.25 && settings put global transition_animation_scale 0.25 && settings put global animator_duration_scale 0.25 && sync"

adb shell "setprop debug.oculus.refreshRate 120 && sync"

adb shell "getprop debug.oculus.cpuLevel"

adb shell "getprop debug.oculus.gpuLevel"

adb shell "getprop debug.oculus.adaclocks.force"

adb shell "getprop debug.oculus.phaseSync"

adb shell "settings get global always_finish_activities"

adb shell "settings get global wifi_scan_throttle_enabled"

adb shell "settings get global window_animation_scale"

adb shell "settings get global transition_animation_scale"

adb shell "settings get global animator_duration_scale"

• Developer mode needs manually re-enabled from Oculus app on mobile after Factory Reset ¹⁾
• Hold PWR + Vol- to access bootloader menu to perform Factory Reset on-device
• %localappdata%\Oculus contains Logs
• Since it's Qualcomm, EDL mode could be interesting to dump and flash partitions

• The lenses spread a few mm more past 68mm just enough to make the VR experience significantly better for me around 71mm!
• Take a bottle cap and jam it in-between the facial interface and proximity sensor so that it keeps the lenses spread as-far over
• Disable the option to automatically wake the headset when you put it on since the proximity sensor is always-covered

• DCH 516.63
• Oculus 42.0.0.136.285
• Wired Link with H.264
• Windows 10 Enterprise LTSC (19044.1806)

• 1.0x

• 72Hz: 3616 x 1840
• 80Hz: 3456 x 1744
• 90Hz: 3264 x 1648
• 120Hz: 2816 x 1424

• 2432 x 1216

• 72Hz: 0.7x
• 80Hz: 0.7x
• 90Hz: 0.7x
• 120Hz: 0.9x

• 5408 x 2736

• 72Hz: 1.5x
• 80Hz: 1.6x
• 90Hz: 1.7x
• 120Hz: 1.9x

• Adrenalin 22.5.2
• Oculus 41.0.0.88.353
• Wired Link with H.264

• 1.0x

• 72Hz: 3616 x 1840
• 80Hz: 3456 x 1744
• 90Hz: 3264 x 1648
• 120Hz: 2816 x 1424

• 2432 x 1216

• 72Hz: 0.7x
• 80Hz: 0.7x
• 90Hz: 0.7x
• 120Hz: 0.9x

• 5408 x 2736

• 72Hz: 1.5x
• 80Hz: 1.6x
• 90Hz: 1.7x
• 120Hz: 1.9x

• Width x Height
• If entering into Oculus Debug Tool, only the first part (width) gets inputted into Encode Resolution Width under Oculus Link
• This needed manually set if using Air Link with a RX 580
• These numbers need retrieved from wired Link periodically with Link changes

1. Connect Quest with wired Link cable with desired Refresh Rate set
2. Go to the Oculus folder below
3. Find the last-modified Service text file
4. Search for the text line Converted encode resolution

%localappdata%\Oculus

Converted encode resolution

• DCH 516.63
• Oculus 42.0.0.136.285
• Wired Link with H.264
• Windows 10 Enterprise LTSC (19044.1806)

• Last updated: 2022/07/11
• The same max 3664 resolution is usable 72Hz-120Hz as-reported by Oculus

• 72Hz = 3680, 1920 (3664 selected)
• 80Hz = 3680, 1920 (3664 selected)
• 90Hz = 3680, 1920 (3664 selected)
• 120Hz = 3680, 1920 (3664 selected)

3680

• Last updated: 2022/07/11
• TODO

• Latency at H.264 is 4ms at 1080p@144, 6ms at 1440p@144, and 10ms at 4K@30 ²⁾
• It looks ideal to either use 120Hz, or limit encode resolution for lower refresh rates to ~2560 in order to avoid the 4ms spike

• Adrenalin 22.5.2
• Oculus 41.0.0.88.353
• Wired Link with H.264

• Last updated: 2022/06/07

• 72Hz = 3680, 1920 (3664 selected)
• 80Hz = 3520, 1920 (3504 selected)
• 90Hz = 3200, 1760 (3200 selected)
• 120Hz = 2752, 1440 (2736 selected)

3680

3520

3200

2752

07/06 22:21:11.099 {DEBUG}   [xrstreaming] No hevc support found
07/06 22:21:11.099 {INFO}    [xrstreaming] RemoteHeadset/HEVC not set, Using AVC
07/06 22:21:11.099 {DEBUG}   [xrstreaming] Creating AMD HP3D d3d11 device
07/06 22:21:11.099 {DEBUG}   [xrstreaming] Reported AMD amdlvr64.dll version 1.0.16.0
07/06 22:21:11.099 {DEBUG}   [xrstreaming] AMDALVRFactory::Create: ALVRInit(1.0.15.0, &factory) succeeded.
07/06 22:21:11.141 {DEBUG}   [xrstreaming] AMDALVRDisplayFactory::Create: ALVRInit(1.0.15.0, &factory) succeeded.

• Last updated: 2022/06/07

• Latency at H.264 is 4ms at 1080p@144, 6ms at 1440p@144, and 10ms at 4K@30 ³⁾
• It looks ideal to either use 120Hz, or limit encode resolution for lower refresh rates to ~2560 in order to avoid the 4ms spike

• Last updated: 2021/10/26
• Oculus client 34.0.0.53.185
• H.264/AVC

• 72Hz = 1984, 1120
• 80Hz = 1824, 960
• 90Hz = 1664, 960
• 120Hz = 1376, 800

1984

1824

1664

1376

• Old School RuneScape
• Radeon ReLive VR
• ALVR Nightlies ⁴⁾
• DevilutionX ⁵⁾

• File sizes are rounded-up

• https://www.rtcwquest.com/
• https://sidequestvr.com/app/1446/return-to-castle-wolfenstein-vr
• https://github.com/DrBeef/RTCWQuest

• Full RTCW install
• Venom VR 6.5.2 with improved AI sp_vpak9.pak

• 2021/08/31: 1.24 GB

sdcard\RTCWQuest\Main\pak0.pk3
sdcard\RTCWQuest\Main\sp_pak1.pk3
sdcard\RTCWQuest\Main\sp_pak2.pk3
sdcard\RTCWQuest\Main\sp_pak3.pk3
sdcard\RTCWQuest\Main\sp_pak4.pk3
sdcard\RTCWQuest\Main\sp_vpak5.pk3
sdcard\RTCWQuest\Main\sp_vpak6.pk3
sdcard\RTCWQuest\Main\sp_vpak7.pk3
sdcard\RTCWQuest\Main\sp_vpak8.pk3
sdcard\RTCWQuest\Main\sp_vpak9.pk3
sdcard\RTCWQuest\Main\z_pak1.pk3

• https://www.quakevr.com/
• https://sidequestvr.com/app/93/quakequest
• https://github.com/DrBeef/QuakeQuest

• Both pak files from Q1 install
• https://docs.google.com/document/d/1npgZjIF33fKJdthm6xSnlIbrbB0mM0Cd6ZskzE3t5NM/edit

• 2021/08/31: 812 MB

sdcard\QuakeQuest\id1\IP_Weapons_Ruohis_Key_Plague(altered).pk3
sdcard\QuakeQuest\id1\mindgrid_audio_sound.pk3
sdcard\QuakeQuest\id1\PAK0.pk3
sdcard\QuakeQuest\id1\PAK1.pk3
sdcard\QuakeQuest\id1\QR_2048_QuakeBestiary_Alfader_Nergal.pk3
sdcard\QuakeQuest\id1\QRP_item_textures_v.0.73_dp.pk3
sdcard\QuakeQuest\id1\QRP_map_textures_v.1.00.pk3

• https://www.lambda1vr.com/
• https://sidequestvr.com/app/124/lambda1vr-half-life-in-vr
• https://github.com/DrBeef/Lambda1VR

• Entire valve folder
• Entire valve_hd folder dropped into valve folder
• HL_Gold_HD added
• commandline.txt optimized settings with HL_Gold_HD

• 2021/08/31: 2.12 GB

sdcard\xash\HL_Gold_HD\*
sdcard\xash\valve\*
sdcard\xash\commandline.txt

• https://www.doom3quest.com/
• https://sidequestvr.com/app/2651
• https://github.com/DrBeef/Doom3Quest

• Just the base files needed (no extras or mods)

• 2021/08/31: 1.56 GB

sdcard\Doom3Quest\base\game00.pk4
sdcard\Doom3Quest\base\game01.pk4
sdcard\Doom3Quest\base\game02.pk4
sdcard\Doom3Quest\base\game03.pk4
sdcard\Doom3Quest\base\pak000.pk4
sdcard\Doom3Quest\base\pak001.pk4
sdcard\Doom3Quest\base\pak002.pk4
sdcard\Doom3Quest\base\pak003.pk4
sdcard\Doom3Quest\base\pak004.pk4
sdcard\Doom3Quest\base\pak005.pk4
sdcard\Doom3Quest\base\pak006.pk4
sdcard\Doom3Quest\base\pak007.pk4
sdcard\Doom3Quest\base\pak008.pk4

• https://www.questzdoom.com/
• https://sidequestvr.com/app/796
• https://github.com/DrBeef/QuestZDoom

• 2021/08/31: 63 MB

sdcard\QuestZDoom\wads\DOOM.WAD
sdcard\QuestZDoom\wads\DOOM2.WAD
sdcard\QuestZDoom\wads\HERETIC.WAD
sdcard\QuestZDoom\wads\HEXDD.WAD
sdcard\QuestZDoom\wads\HEXEN.WAD

• https://quake3.quakevr.com/
• https://sidequestvr.com/app/8601/quake3quest
• https://github.com/DrBeef/ioq3quest

• 2022/05/18: 858 MB

sdcard\ioquake3Quest\baseq3\pak0.pk3
sdcard\ioquake3Quest\baseq3\pak1.pk3
sdcard\ioquake3Quest\baseq3\pak2.pk3
sdcard\ioquake3Quest\baseq3\pak3.pk3
sdcard\ioquake3Quest\baseq3\pak4.pk3
sdcard\ioquake3Quest\baseq3\pak5.pk3
sdcard\ioquake3Quest\baseq3\pak6.pk3
sdcard\ioquake3Quest\baseq3\pak7.pk3
sdcard\ioquake3Quest\baseq3\pak8.pk3
sdcard\ioquake3Quest\missionpack\pak0.pk3
sdcard\ioquake3Quest\missionpack\pak1.pk3
sdcard\ioquake3Quest\missionpack\pak2.pk3
sdcard\ioquake3Quest\missionpack\pak3.pk3

sdcard\Android\data\com.beatgames.beatsaber\files\AvatarData.dat
sdcard\Android\data\com.beatgames.beatsaber\files\PlayerData.dat

sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\CampaignSaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\EconomySaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\RunSaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\SettingsSaveData.cls
sdcard\Android\data\com.schellgames.untilyoufall\files\Profile1\TutorialSaveData.cls

• Need to re-set Gladiator name on first-start, but progress will be loaded

sdcard\UE4Game\GladiusQuest\GladiusQuest\Saved\SaveGames\GladiusInstance.sav